SATC abrasives

Name: SATC abrasives
Address: 1016# Dingxi Road, Shanghai, 200050, CN
Telephone: +862159555666

Home
China
Shanghai
SATC abrasives

SATC , Shanghai Abrasive Tools Co., Lltd.was founded in 1990. abrasive and tools supplier

focusing on manufacturing and exporting of coated abrasives and bonded abrasives,which are suitable for DIY and household, drywall industry, metalworking, woodworking, automotive etc

17/05/2026

Drywall Sanding Without the Dust Storm. SATC Multi-Hole Discs Deliver Superior Dust Extraction

Sanding drywall is miserable when dust goes everywhere. You can’t see what you’re doing, you breathe it in, and cleanup takes longer than the job itself.

Meet the SATC 9″ Multi-Hole Drywall Sanding Disc — engineered to make drywall sanding cleaner, faster, and far less frustrating.

Why It Works
⚫Multi-Hole Design: More holes than standard discs. Pairs perfectly with your dust extraction system — dust gets sucked away before it can clog the surface or float into the air.
⚫White Fused Alumina Grain: Sharp, durable, and self-sharpening. Cuts fast through joint compound, paint, and fillers. Resists clogging, so the disc stays effective longer.
⚫Ultra-Dense Hook & Loop Backing: Grips your sander pad securely. No slipping, no falling off — even when you’re sanding overhead or at awkward angles.
⚫Resin Over Resin Bond: Heat-resistant bond keeps abrasive grains attached under heavy use. Longer disc life, consistent performance.
Perfect for Drywall Professionals
⚫Sanding joint compound on seams and corners
⚫Smoothing paint and fillers
⚫Prepping walls and ceilings for final coating
⚫Compatible with all 9″ (225mm) drywall sanders, long-reach sanders, giraffe sanders, ceiling sanders
Specifications
Specification Detail
Diameter 9″ (225mm)
Hole Pattern Multi-hole
Grit Range 40 – 220
Abrasive White Fused Alumina
Backing Hook & Loop
Bonding Resin over Resin
Grit Selection Guide
Grit Best For
40 # – 80 # Heavy stock removal — thick joint compound, old paint
100 # – 150 # Surface blending — smoothing filler, removing scratches
180 # – 220 # Fine finishing — ready-for-paint smoothness

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Drywall-sanding-disc/-9-in-premium-sanding-disc-multi-hole-hook--loop-drywall-sander-paper-80-grit

10/05/2026

From Dull to Razor Sharp — No Water, No Oil, No Mess

A dull knife is frustrating — and dangerous. But traditional sharpening stones need soaking, oiling, and constant maintenance.

Introducing the SATC 8″ Double-Sided Diamond Sharpening Stone — dry sharpening that works faster, cleaner, and easier.

Two Sides. Two Purposes. One Complete Edge.
Side Grit Best For
Coarse 400 # Repair large indentations, remove rough edges, consolidate the blade
Fine 1000 # Remove burrs, polish, smooth the edge to a razor finish
Why You’ll Love It
⚫No Oil or Water: Dry sharpening only. No mess, no prep, no cleanup. Sharpen anywhere — kitchen, garage, campsite.
⚫Diamond Surface: Super abrasive, reliable, and fast. Works on high-carbon steel, stainless steel.
⚫Effortless Sharpening: Light pressure only. Consistent results with less fatigue.
⚫Non-Slip Holder Included: Adds weight and grip — stone stays firmly in place during sharpening. Elevates the stone above the bench for easy handling.
⚫Clearance Channel Design: Debris and swarf fall away from the surface — prevents clogging, maintains cutting speed.
Multi-Use — Sharpen Almost Anything
⚫Kitchen knives
⚫Outdoor & hunting knives
⚫Plane blades and chisels
⚫Scissors
Quick Tips
1.Place knife at 15–20° angle to the stone
2.Apply light, even pressure
3.Push back and forth 10–15 times
4.Start with 400 grit, finish with 1000 grit
5.No oil, no water — just sharpen

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Sharpening-stone/8in-double-sided-diamond-sharpening-bench-stone-4001000-grit-w-non-slip-holder

03/05/2026

Stop Scratching. Stop Chemicals. SATC Rubber Eraser Wheel – Safe for Remove Decals

Removing decals, pinstripes, and stickers from cars used to mean plastic scrapers or harsh chemicals .
Not anymore.

Meet the SATC 4″ Rubber Eraser Wheel — the clean, safe, and fast way to strip decals and adhesives.
How It Works

Attach it to any standard drill. Apply the side of the wheel to the decal. Watch it disappear — the rubber friction “eats” the vinyl/adhesive without damaging the paint underneath.

Why You’ll Love It
⚫Paint-Safe — Soft rubber won’t scratch acrylic enamel or urethane paint. No more gouges from scraper blades.
⚫Chemical-Free — No toxic solvents, no skin irritation, no fumes. Better for you and the environment.
⚫Fast & Efficient — Removes vinyl, decals, pinstripes, double-sided tape, foam tape, and adhesive residue in minutes.
⚫Money Saver — Avoid the cost of respraying a damaged panel. Removes the decal, not the paint.
⚫Built to Last — Alternating slotted tooth design dissipates heat, prevents gumming, and extends wheel life.
Important Notes
⚫Works on: Acrylic enamel, urethane paint
⚫Do not use on: Lacquer coatings or plastic surfaces
Perfect For
⚫Auto body shops & detailers
⚫Race teams changing vinyl graphics
⚫DIYers removing old stickers or pinstripes

Visit our website for full specs & free sample request:
https://www.satcabrasives.com/Ruber-earser-wheel/eraser-wheel-4-inch-decal-remover-eraser-wheel-1-pack-with-adapter-rubber-eraser-wheel-for-drill-removing-decals-adhesives-pinstriping-stickers

26/04/2026

SATC 8” Steel Wire Trimmer Brush——From Overgrown Garden to Clean Metal

Meet the SATC 8″ Steel Wire Trimmer Brush — a rugged accessory that pulls double duty.
In the Garden
Mounted on your brush cutter, it powers through thick weeds, dense grass, and stubborn shrubs. 36-tooth steel wire construction bites into vegetation while the positioning hole design keeps wires from shifting — no constant readjustments.
In the Workshop
Swap it onto your angle grinder, and it becomes a heavy-duty surface prep tool:
⚫Remove rust and scale
⚫Clean welds and slag
⚫Deburr metal edges
⚫Strip old coatings
Features
⚫Stainless Steel Wire — corrosion-resistant, durable, and robust
⚫36-Tooth Design — efficient cutting and cleaning
⚫200mm Diameter, 25.4mm Bore — universal fit
⚫Compatible with most brush cutters
⚫Also fits standard angle grinders for metalworking
Precautions
When using on angle grinders, always wear:
⚫Safety goggles
⚫Heavy-duty gloves
⚫Hearing protection

Visit our website for details & free sample request:
www.satcabrasives.com/Wire-brush/8quot-200mm-grass-strimmer-head-trimmer-brush-steel-wire-wheel-garden-weed-trimmer

19/04/2026

SATC Red Scuff Pads – Smooth, Consistent Results for Auto & Metal

Before paint, before polish, before finish — there’s surface preparation. And the SATC 6″ x 9″ Red Scuff Pad makes that step faster, easier, and more consistent.
Why It Works
⚫320 Grit — The Sweet Spot
Aggressive enough to remove oxidation, dirt, and old coatings — fine enough to leave a smooth, uniform surface ready for paint or adhesive.
⚫Non-Woven Nylon Construction
Open web structure resists clogging. Abrasive particles stay sharp, even on messy jobs.
⚫Ultra-Flexible
Bends, twists, and conforms to curves, contours, and tight corners. No more struggling to reach awkward spots.
⚫Tear-Resistant
High-strength fiber base withstands repeated use, pulling, and twisting. Outlasts ordinary pads.
⚫Washable & Reusable
Rinse clean and reuse — extends service life and reduces waste.
Where to Use It
⚫Automotive: Scuff old clear coat, prep for repaint, blend repairs — essential for body shops and detailers.
⚫Metalworking: Remove oxidation from stainless steel and aluminum, deburr edges, create satin finishes.
⚫Woodworking: Smooth surfaces, remove splinters, prep for stain or varnish.
⚫General Maintenance: Clean tools, prep surfaces for adhesive, remove light rust and scale.
Specifications
⚫Size: 6″ x 9″ (150mm x 230mm)
⚫Grit: 320 #
⚫Color: Red
⚫Thickness: 0.39″

Visit our website for full specs & free sample request:
www.satcabrasives.com/Non-woven-hand-pad/red-320-6quot-x-9quot-scuff-pads-polishing-pad-stainless-steel-aluminum-automotive-surface-prep

12/04/2026

Say Goodbye to Clogged Sandpaper. Say Hello to Mesh

Introducing the SATC Aluminum Oxide Mesh Sanding Roll — a smarter way to sand, without the dust buildup.
⚫No Clogging
The open mesh structure allows dust to fall through, not get trapped. No more tapping or brushing your sandpaper every few seconds.
⚫Dust-Free Sanding
Less dust in the air, cleaner work surface, and better visibility of your progress — especially critical for automotive paint prep and fine finishing.
⚫Ultra-Flexible
The tear-resistant composite backing bends and wraps around curves, contours, and irregular shapes. Sand pipes, moldings, and panels with ease.
⚫Quick-Change Ready
Hook & loop backing fits orbital sanders and hand blocks. Swap grits in seconds — from aggressive 80 # to fine 800 # on the same roll.
Where to Use:
⚫Auto body filler & primer sanding
⚫Wood — edges, splinters, and smoothing
⚫Metal — deburring, rust removal, scratch repair
⚫Wall — drywall and patching compound
Available in: 70mm x 12m rolls | 60–800 grit

Visit our website for details & free sample request: www.satcabrasives.com/Sandpapersanding-cloth-roll

09/04/2026

SATC Nylon Quick Change Discs – From Aggressive Stock Removal to Mirror Finish Polishing

From aggressive rust removal to a polished finish — SATC Quick-Change Roloc Discs give you a seamless workflow in one system.
Each disc features a flexible non-woven nylon construction with premium aluminum oxide abrasive, conforming perfectly to flat, curved, and contoured surfaces.
⚫Coarse (Brown) — Heavy Stock Removal
Strip thick rust, heavy paint, weld slag, and rough burrs. Aggressive cutting for initial shaping and heavy-duty prep.
⚫Medium (Red) — General-Purpose Conditioning
Blend surface scratches, remove thin coatings, deburr edges, and prep substrates for paint or final finish. The go-to for automotive bodywork and metal detailing.
⚫Fine (Blue) — Precision Surface Refinement
Final buffing, polishing, and smoothing imperfections. Achieve a uniform, clean finish on metal, wood, and plastic.
Quick-Change Advantage
Tool-free attachment with safety torque spiral design — discs screw onto the mandrel securely and swap in seconds. No downtime, no tools needed.
⚫Available in 2″ and 3″ sizes
⚫Max RPM: 25,000 (2″) / 20,000 (3″)
⚫Type R / Type S
⚫Free samples available for qualified B2B customers

Visit our website for full specs: www.satcabrasives.com/Roloc-disc

08/04/2026

SATC 3x21" Belts – Engineered for Demanding Sanding Applications

Whether you’re shaping hardwood, blending metal, or sharpening tools, the right sanding belt makes all the difference.
Introducing the SATC 3″ x 21″ Aluminum Oxide Sanding Belt Assortment — a complete set covering 7 grits from coarse to ultra-fine.
⚫Built for Performance
X-Weight Polyester Cloth Backing
Heavy-duty, 100% polyester. High tear resistance, excellent heat resistance, and dimensional stability under load. Runs smoothly in either direction — no orientation worries.
⚫Open-Coat Aluminum Oxide
Premium abrasive with open-coat construction — grains spaced to allow dust and swarf to clear away. Resists loading and clogging, giving you consistent cutting power and longer belt life.
⚫Resin Over Resin Bonding
High-strength bond system provides superior grain support. Withstands heat and humidity — stays sharp longer.
⚫Strong Butt Joint
Smooth, low-profile joint that runs quietly in either direction on your belt sander.
Full Grit Range — One Belt, Multiple Finishes
Grit Best For
40 # – 80 # Heavy stock removal — Level welds, strip paint, shape wood, remove rust
120 # – 240 # Surface blending — Refine scratches, prep for finish, smooth filler
240 # – 400 # Fine finishing — Final sanding, ready-for-coat surface, uniform texture
Works On:
⚫Wood — hardwood, softwood, painted surfaces, first and second grinding
⚫Metal — non-ferrous metals (aluminum, brass, copper)
⚫Plastic & Fiberglass — smooth edges and surfaces
⚫Tool Sharpening — axes, shovels, knives, chisels with fine grits

Visit our website for full specs & free sample request:
www.satcabrasives.com/Sanding-belt/3x21-in-aluminum-oxide-belt-sander-sanding-belts-40-60-80-120-150-240-400-grit

10/02/2025

Don't miss out on our Sale Event ending Jan 24, 2025! Save up to 5% on selected listings including Hand Sanding Block, Flap Discs, Sanding Discs, and Knife Sharpening Stone Set. 🛠️✨

22/11/2024

CIHS Hardware----Shanghai, China
Oct 21-23,2024

05/05/2024

Check out SATC Professional Abrasive Tools store! We offer a wide variety of cutting discs, sharpening stones, sanding discs, and quick change discs for all your industrial needs. Our products are fast, precise, and provide a clean cut. Don't forget to wear the proper personal protective equipment (PPE) when using our cutting discs. Shop now and take advantage of our 1-year warranty! 🛠️👷‍♂️

Address

1016# Dingxi Road
Shanghai
200050

Telephone

+862159555666

Website

https://abrasivetool.myshopify.com/

Alerts

Be the first to know and let us send you an email when SATC abrasives posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SATC abrasives:

Shortcuts

Want your business to be the top-listed Hardware Service in Shanghai?