01/06/2026
Fitting panels at floor level, over baths and shower trays 🔧
Getting the finishing details right at floor level is key to achieving a clean, professional installation. Our video guide takes you through fitting panels at floor level, over baths and shower trays for a neat, watertight finish.
🔹 Always use the base profile when fitting panels over baths and shower trays
🔹 Finishing panels should go to the floor - Any flooring should ideally wrap up behind the base profile and panel, so it continues up the wall, approx. 100mm
🔹When installing the base profile, leave a 5mm expansion gap between the bottom of the profile and the floor
🔹 Apply Fibo Seal carefully to the base profile before fitting into position, then also attach with screws in the pre-drilled holes
🔹Once all panels are fitted on the base profile, remove excess sealant with our sealing tool and Fibo wipe, to help achieve a clean finish
🔹Then apply Fibo Seal between the bottom of the panels and the base profile, and apply Fibo Clean on the sealant, remove excess sealant with our sealing tool
🔹 Taking care with the finishing details goes a long way in helping achieve a professional result with Fibo
Watch the full guide for further information and follow along with our practical installation videos on our website: https://fibo.co.uk/installation-videos-wall-panels/