Armourseal

06/11/2025

Welcome for enquiry
欢迎询问
Armourseal Trading and Services Sdn Bhd

Tel : 03-7984 7170

We are the supplier for all the construction materials for many branded, Sika , Fosroc , Mapei , Hilti , Bostik , Pentens ...

👉 PVC Waterstop / Swellable Waterstop
👉 Non Woven Geotextiles
👉 Waterproofing Meterial
👉 Pu injection
👉 Torch on membrane
👉 Tiles Adhesive
👉 PU coating
👉 Grouting
👉 Cement
👉 Admixtures

30/10/2025

Bostik Boscoseal AC2 - Water Based Acrylic Polymer Fibre
Reinforced Roof Waterproofing Membrane 5KG / 20 KG

Boscoseal AC2 is a one part water based acrylic polymer fibre reinforced waterproofing membrane. It is specially formulated for commercial and residential internal and external waterproofing applications. Low in odour, it is well suited to internal use. It offers excellent rolling ability and easy application by brush or roller. The fibre, reinforced composition of Boscoseal AC2 combines a matrix binder within the membrane structure to provide extra strength and form high build dry film thickness. Boscoseal AC2 does not require the use of additional reinforcing matting.

Application Area :

• Internal wet areas to be tiled including showers, bathrooms, toilets and laundries.

• External balconies and decks prior to the installation of a covering material such as tiles or non-solvent topping systems.

• Exposed roof areas subject to weather and UV exposure.

• Suitable for waterproofing a broad range of substrates including concrete, cement render, brickwork, particleboard, plywood, plasterboard, gyprock, composition board and fibre cement sheeting.

Product Features :

• Low odour for ease of use in internal applications

• Excellent rolling and brushing ability

• Enviromentally friendly

• Fibre reinforced, does not require the use of additional reinforcing matting

• Water based for easy application and clean up

• Flexible

• Excellent UV resistance

• Foot trafficable

COLOR : GREY / WHITE
PACKING : 5KG / 20KG

30/10/2025

Product Details
BOSTIK BOSCOCEM SLURRY

TWO-COMPONENT CEMENTITIOUS WATERPROOFING

KEY FEATURES

- Can be tiled over successfully.

- Ability to withstand heavy topping

without fracture.

- Bonds well to damp surfaces.

- Hard and abrasion resistant

DESCRIPTION

Boscocem Slurry is a cement-based two-component

acrylic reactive polymer modified waterproofed coating.

Boscocem Slurry is highly effective for positive side

waterproofing.

RECOMMENDED USES

Boscocem Slurry is designed for external and internal

waterproofing protection to;

• Water Tanks

• Bathrooms, Balconies, terraces

• Pool decks

• Water Features

• Planter Boxes, Canopies

As waterproofed underlayment to prevent seepage

before laying marbles.

SUBSTRATE PREPARATION

All substrates shall be sound, clean and free of dust,

excess mortar, oil or other loose particles. Cracks,

honeycombs and other defects must be repaired using

suitable cement mortar.

For excessively dry substrate, dampen the substrate

and keep it continuosly moist for 1 to 2 hours before

application. Remove all excess water or standing water

and allow the surface to become almost dry to provide

an SSD (Saturated Surface Dry) condition before applying

the waterproofing coating

APPLICATION INSTRUCTION

MIXING

Boscocem Slurry is packed ready to use in 2 components.

Always put the liquid component in a clean mixing

container, and slowly add the powder component

whilst stirring. Mix until homogeneous slurry is obtained

and make sure that no unmixed powder is left at the

bottom of the container. Mix on site using a slow speed

PACKING 25kg sets :

Part A : White liquid, 5 kgs.

Part B : Grey powder, 20 kgs.

30/10/2025

GEOTEXTILE NON WOVEN MEMBRANE POLYFELT 纺织土工布
For inquiry, pls call : 03-7984 7170 / email: [email protected]
# Separation: Non-woven geotextile can be used to separate two
material layers with different grain size under pressure, making
grained materials remain its mechanical properties.
# Reinforcement: Non-woven geotextile can also transmit certain
tensile strength to soil in the form of soil reinforcement or
putting soil in geotube.
# Protection: Environment strength (e.g. salt water resistance or quick drainage) allows geotextile to make a corrosion resistant layer for d**e, embankment, coastal and bridge pier.
# Filtration: Non-woven geotextile can play as filtering layer between two material layers with different permeability and grain size to avoid corrosion from shorter grained materials layer toward remaining materials layer.
# Drainage: Non-woven geotextile can also be used to make underground ditch because of its permeability. Flows under the ground will focus to ditch equipped with geotextile and go to water reservoir by pipeline.
Size: 4m x 250m length per roll /
4m x 25m length per roll /
1m x 250m length per roll
For inquiry, pls call : 03-7984 7170 / email: [email protected]
#防水 #土工布

30/10/2025

GEOTEXTILE NON WOVEN MEMBRANE POLYFELT 纺织土工布

For inquiry, pls call : 03-7984 7170 / email: [email protected]

# Separation: Non-woven geotextile can be used to separate two
material layers with different grain size under pressure, making
grained materials remain its mechanical properties.

# Reinforcement: Non-woven geotextile can also transmit certain
tensile strength to soil in the form of soil reinforcement or
putting soil in geotube.

# Protection: Environment strength (e.g. salt water resistance or quick drainage) allows geotextile to make a corrosion resistant layer for d**e, embankment, coastal and bridge pier.

# Filtration: Non-woven geotextile can play as filtering layer between two material layers with different permeability and grain size to avoid corrosion from shorter grained materials layer toward remaining materials layer.

# Drainage: Non-woven geotextile can also be used to make underground ditch because of its permeability. Flows under the ground will focus to ditch equipped with geotextile and go to water reservoir by pipeline.

Size: 4m x 250m length per roll /
4m x 25m length per roll /
1m x 250m length per roll

For inquiry, pls call : 03-7984 7170 / email: [email protected]
#防水 #土工布

29/10/2025

29/09/2025

The PVC DUMBELL waterstops is designed to provide an integral sealing system for movement and construction joints in concrete cast in-situ. These joints typically occur in the following types of structure:

Water retaining
 Reservoirs, water towers and sewage tanks
 Dams, culverts, canals and spillways
 Swimming pools
 Bundled areas surrounding liquid retaining tanks

Water excluding
 Basements and underground car parks
 Tunnels and subways
 Abutments and retaining walls
 Roof decks and podium areas

Advantages
 Range of profiles to suit every need
 Fully continuous 4 bulbed network
 Reinforced eyeleted edge flanges for positive fixing
 Simple on-site jointing
 Full range of moulded and fabricated intersection pieces
 WRC approval for use in contact with potable water
 Special grades for Hydrocarbons resistant applications

Dumbell Series – 150mm and 230mm width

Design Requirements :-
The width and thickness of the waterstop to be used depends on concrete thickness, the position of reinforcement, aggregate size and concreting method employed.
Generally, the 230mm width water stop is for wall of slab of 230mm thickness or more. For wall or slab less that 230mm thick, a narrower waterstop of approximated equal to the wall or slab.

Simple waterstop profiles based on dumbells are cast into the edges of adjacent concrete panels, which act as baffles. In the event of joints opening as drying shrinkage or other movement occurs, the edge bulbs of the profile act as anchors. These induce tensions across the waterstop resulting in a sealing effect at the inner faces of the edge bulbs.

PACKING :

1.) 150MM X 15M
2.) 230MM X 15M

FOR MORE ENQUIRY PLEASE DO NOT HESITATE TO CALL US : 03-79847170 / email : [email protected]

29/08/2025

BOSTIK GLASS N SEAL S548 X 260ML (WHITE)

GLASS ‘N’ SEAL WEATHERSEAL
NEUTRAL SILICONE FOR WEATHER SEALING & WINDOW SEALING
TECHNICAL DATA SHEET

BENEFITS

- Easy to dispense and apply

- Non-sag at vertical application

- UV and weather resistance

- Good adhesion performance on glass, ceramic, steel, aluminium etc.

- Neutral cure, non-corrosive to metallic surfaces

PRODUCT DESCRIPTION

Bostik S548 GLASS ‘N’ SEAL WEATHERSEAL is
single component, neutral curing, ready-to-use
silicone elastomer which is highly suitable for
weatherseal and glazing applications. It is moisture curing sealant that yields permanently flexible and
strong seal. In addition to the unique features of
silicone rubber such as superior high and low
temperatures resistance, water resistance, and
outstanding weatherability, Bostik S548 GLASS ‘N’
SEAL WEATHERSEAL also provides excellent adhesion to glass, metal and numerous construction materials.

APPLICATIONS

Bostik S548 GLASS ‘N’ SEAL WEATHERSEAL was specifically developed for high-grade windows and door sealing, outdoor and indoor sealing, sunlight room, sun-roof, curtain wall weather seal, weatherproof for aluminium plate, aluminiumplastic plate, and other applicable construction joint sealing

DIRECTIONS OF USE

A joint with the correct dimensions is able toabsorb movements between building materials.The joint depth should always be in the correctrelationship of the joint width. A general rule is theratio of joint depth to the width of the joint with ajoint width up to 10 mm is 1:1, with a minimum of 5mm in width and depth. For joints wider than 10mm, the depth is the width divided by 3 plus 6 mm.

28/08/2025

BOSTIK BOSCOSEAL F100 CHOPPED STAND MAT FIBRE MATCH

Description
Boscoseal F100 is a 100g/m2 chopped strand mat that is mixed with resin. It is lightweight but extremely strong for reinforcement purposes.



Features

Very high smoothness of the laminate surface
Good compatibility with vinyl ester and resins
Highly suitable for the layer with coating


Size

1mtr (W) x 50mtr (L)


Recommended Uses

Roof coating waterproofing
Boats
Automobiles
Bathtubs
Water tanks
Pipes
Cladding


Coverage

Approx. 50 m2 per roll.

FOR ENQUIRY MORE INFORMATION PLEASE CALL : 03-79847170 / EMAIL : [email protected]

28/08/2025

Bostik Boscoseal AC2 - Water Based Acrylic Polymer Fibre Reinforced Roof Waterproofing Membrane

Boscoseal AC2 is a one part water based acrylic polymer fibre reinforced waterproofing membrane. It is specially formulated for commercial and residential internal and external waterproofing applications. Low in odour, it is well suited to internal use. It offers excellent rolling ability and easy application by brush or roller. The fibre, reinforced composition of Boscoseal AC2 combines a matrix binder within the membrane structure to provide extra strength and form high build dry film thickness. Boscoseal AC2 does not require the use of additional reinforcing matting.

Application Area :

• Internal wet areas to be tiled including showers, bathrooms, toilets and laundries.

• External balconies and decks prior to the installation of a covering material such as tiles or non-solvent topping systems.

• Exposed roof areas subject to weather and UV exposure.

• Suitable for waterproofing a broad range of substrates including concrete, cement render, brickwork, particleboard, plywood, plasterboard, gyprock, composition board and fibre cement sheeting.

Product Features :

• Low odour for ease of use in internal applications

• Excellent rolling and brushing ability

• Enviromentally friendly

• Fibre reinforced, does not require the use of additional reinforcing matting

• Water based for easy application and clean up

• Flexible

• Excellent UV resistance

• Foot trafficable

PACKING :
1.) 5KG PER TIN
2.) 20KG PER PAIL