Orbimax

20/10/2026

As Australia and global markets accelerate clean energy initiatives, hydrogen infrastructure is moving rapidly from pilot demonstration to industrial-scale deployment. https://bit.ly/4i7k5BA

14/10/2026

Across Australia and global fabrication hubs, workshops and on-site contractors are running into the same wall: demand for high-spec piping is booming, but certified manual TIG welders are becoming increasingly difficult to find. https://bit.ly/4eyG4QP

27/09/2026

Switching from manual TIG to automated orbital welding isn’t just about quality, it’s a commercial decision. We broke down real shop data comparing cycle times, rework rates, purge gas usage, and labour costs on a 500-joint stainless spooling run. Discover what the numbers mean for your tender margins. https://bit.ly/4yltWux

20/09/2026

As Australia’s data centre construction pipeline surges past $26 billion, the mechanics of cooling these facilities have undergone a fundamental shift. Here is what tier-one operators and mechanical consultants are writing into specifications, and why manual pipe fabrication methods are struggling to keep pace. https://bit.ly/4y7wo7S

01/09/2026

𝗧𝗿𝘂𝘀𝘁 𝗧𝗵𝗲 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝘆 𝗘𝘅𝗽𝗲𝗿𝘁𝘀

At Orbimax, we don't just supply equipment; we engineer solutions. With decades of hands-on experience, our technical team is ready to help you optimise your workflow, eliminate defects, and scale your capabilities.

👉Speak to an expert https://bit.ly/45UlINr

27/08/2026

𝗗𝗮𝘁𝗮 𝗖𝗲𝗻𝘁𝗿𝗲 𝗣𝗶𝗽𝗶𝗻𝗴: 𝗧𝗵𝗲 𝗟𝗶𝗾𝘂𝗶𝗱 𝗖𝗼𝗼𝗹𝗶𝗻𝗴 𝗥𝗲𝘃𝗼𝗹𝘂𝘁𝗶𝗼𝗻

Australia's data centre sector is undergoing an unprecedented boom. Market capacity has expanded over forty-fold since 2005, and total investment in the sector is forecast to surpass AUD $26 billion by 2030. A major driver is the rise of hyperscale AI campuses—such as NEXTDC's recent collaborations in Sydney—supporting intensive AI chips.

Continue reading
https://bit.ly/4zVkT4K

25/08/2026

𝗗𝗮𝘁𝗮 𝗖𝗲𝗻𝘁𝗿𝗲 𝗪𝗲𝗹𝗱𝗶𝗻𝗴: 𝗦𝗽𝗲𝗰𝗶𝗮𝗹𝗶𝘀𝘁 𝗧𝗼𝗼𝗹𝘀, 𝗧𝗲𝗰𝗵𝗻𝗶𝗾𝘂𝗲𝘀 & 𝗧𝗿𝗲𝗻𝗱𝘀

Data centre construction is pushing welding and pipe fabrication standards to a new level.

Behind every hyperscale facility sits kilometres of stainless pipework, cooling infrastructure, fire suppression systems and process lines that must operate continuously, often with zero tolerance for failure.

For welders and pipe fabricators, that creates an environment where precision, repeatability and weld integrity are absolutely critical.

Continue reading
👉 https://bit.ly/4hL5mOd

07/08/2026

𝗙𝗼𝗼𝗱𝗣𝗿𝗼 𝟮𝟬𝟮𝟲 𝗪𝗿𝗮𝗽-𝗨𝗽

FoodPro 2026 was a fantastic opportunity to connect with food manufacturers, fabricators, welders, and industry professionals from across Australia.

We'd like to thank everyone who visited the Orbimax stand and took the time to discuss their stainless steel fabrication, welding, and maintenance challenges with our team.

Throughout the event, we showcased a range of solutions designed to help manufacturers achieve cleaner welds, increased productivity, and improved process quality throughout food-grade environments.

Whether you're planning a new project, upgrading fabrication processes, or looking to improve weld quality across your facility, our team is here to help. Contact us today to arrange a demonstration, discuss your application, or learn more about the solutions showcased at FoodPro.

Contact us
👉 https://bit.ly/4fRVkIB

27/07/2026

𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄: 𝗢𝗿𝗯𝗶𝗺𝗮𝘅 𝗣𝗫 𝗦𝗲𝗿𝗶𝗲𝘀 𝗘𝗹𝗲𝗰𝘁𝗿𝗼𝗰𝗵𝗲𝗺𝗶𝗰𝗮𝗹 𝗣𝗮𝘀𝘀𝗶𝘃𝗮𝘁𝗶𝗼𝗻 𝗦𝘆𝘀𝘁𝗲𝗺𝘀

Electrochemical passivation provides a fast and highly controlled method for removing tarnish, scaling, and oxidation from stainless steel post-welding. The Orbimax PX Series utilises a high-current carbon fibre brush system to restore the metal's passive layer in a single step, which processes up to four times faster than traditional methods.

👉 Tap the link to continue reading
https://bit.ly/4hxGJ7l

26/07/2026

Final touches have been made and doors are now open at Foodpro. Come say hello at the Orbimax team.

After three years, foodpro 2026 kicks off in just a few hours! The Hon. Colin Brooks MP will officially open the show with the ribbon cutting at 10am, kicking off Day 1 alongside 450+ exhibitors, live equipment at the Demo Exchange, and a full lineup of Innovation Stage sessions.

Doors open 10am at MCEC, see you on the floor. 🎉

It's not too late to register! Click the link in below to get your foodpro tickets
https://foodproexpo.com/register/