Total Workshop Solutions Australia P/L

Total Workshop Solutions Australia P/L We specialise in cutting-edge services & equipment for automotive, industrial, & mining industries.

Lest we forget. Today we honour the courage, sacrifice and legacy of all who served.
24/04/2026

Lest we forget. Today we honour the courage, sacrifice and legacy of all who served.

Recently completed workshop benching and workstation installation as part of a structured fitout project in NSW.Scope in...
30/03/2026

Recently completed workshop benching and workstation installation as part of a structured fitout project in NSW.

Scope included custom bench layout aligned with hoist bay spacing, integrated air and power routing, and planned access clearances to support safe technician movement.

The workstation configuration was designed to:
• Improve bay efficiency
• Reduce unnecessary movement between tasks
• Support organised tool access
• Maintain safe workflow between bays

Proper bench placement directly impacts daily productivity and long-term flexibility for future equipment upgrades.

At TWSA, workstation design is planned as part of the overall workshop infrastructure — not added after major equipment is installed.

If you're planning a workshop fitout or layout upgrade across NSW, contact our team to discuss structured solutions.

Completed supply and installation of new wheel servicing equipment for an automotive dealership in Artarmon NSW as part ...
25/03/2026

Completed supply and installation of new wheel servicing equipment for an automotive dealership in Artarmon NSW as part of EOFY upgrade planning.

Scope included:
– OMCN’s Roll 55 Wheels balancer
– OMCN’s Grip 24 tyre changer (24” rim capacity)
– Calibration and commissioning
– Technician demonstration and structured handover

Upgrading high-use equipment like balancers and tyre changers improves servicing accuracy, reduces bay turnaround time, and supports consistent workshop performance.

If your workshop is reviewing equipment before 30 June, speak with TWSA about supply and installation across NSW.

Planning hoist upgrades?Before installation, workshop layout should be reviewed.Clearances, bay spacing, cable routing a...
23/03/2026

Planning hoist upgrades?

Before installation, workshop layout should be reviewed.

Clearances, bay spacing, cable routing and air supply integration all affect how efficiently a workshop operates.

A structured layout improves technician movement, bay utilisation and long-term equipment flexibility.

Retrofitting layout issues later can be disruptive and expensive.

If you're reviewing hoist upgrades ahead of EOFY, speak with TWSA about workshop layout planning across NSW.

3 signs your workshop hoists may be due for replacement: • Ongoing faults or downtime • Compliance concerns during inspe...
18/03/2026

3 signs your workshop hoists may be due for replacement:

• Ongoing faults or downtime
• Compliance concerns during inspections
• Hoists slowing down bay workflow

Replacing hoists early is usually safer—and less disruptive—than waiting for failures.

This is something we see regularly across workshops.

Completed in Alexandria, NSW, this aged hoist replacement project supports a 2026-ready automotive service centre focuse...
16/03/2026

Completed in Alexandria, NSW, this aged hoist replacement project supports a 2026-ready automotive service centre focused on safety, compliance, and operational continuity.

Scope of works included:
– Supply and installation of Caizer T53+ 5300kg and T60 6000kg 2-post clear-floor hoists
– Electrical reconnect and commissioning
– Equipment compliant with Australian Standards
– 24-month hoist warranty and structured handover

Forward-planned workshop hoist replacement programs help workshops manage risk, improve bay utilisation, and prepare for future service demand.

At Total Workshop Solutions Australia, we work with automotive and industrial facilities across NSW to deliver compliant, future-focused workshop equipment installations.
If you’re planning upgrades for 2026 and beyond, we’re happy to discuss next steps.

Upgrading workshop equipment should improve performance.But if the supporting infrastructure hasn’t been reviewed, gains...
11/03/2026

Upgrading workshop equipment should improve performance.

But if the supporting infrastructure hasn’t been reviewed, gains are often limited.

Structured workshop systems typically include:
• Air distribution lines
• Cable trays and organised routing
• Oil and fluid pipework
• Fume extraction ducting

These backbone systems determine airflow consistency, electrical stability, workflow efficiency and long-term equipment lifespan.

When infrastructure is undersized or retrofitted, bottlenecks develop — even with new hoists or compressors in place.

If you're planning equipment upgrades, it’s worth reviewing whether your infrastructure is designed to support growth.

TWSA delivers structured workshop planning and installation across NSW.

We recently replaced an ageing compressor with a CP Ironman 5-150 AUS (5.5HP, 150L, three-phase) unit for an automotive ...
09/03/2026

We recently replaced an ageing compressor with a CP Ironman 5-150 AUS (5.5HP, 150L, three-phase) unit for an automotive workshop in Ryde.

Works included:
• Removal of existing Pilot K30 compressor
• Installation of new 10 bar unit delivering 718 L/min air displacement
• Hose fabrication and integration into workshop supply
• Electrical commissioning and system testing

The upgraded compressor provides stable air delivery to support hoists and pneumatic tools, reducing pressure drop and improving daily reliability.

If your air system is nearing end-of-life or struggling under demand, contact TWSA to review your setup.

As workshop service capacity increases, oil and fluid storage systems must be reviewed.Engineered storage and separation...
07/03/2026

As workshop service capacity increases, oil and fluid storage systems must be reviewed.

Engineered storage and separation systems support:
• Environmental compliance
• Safer storage practices
• Audit readiness
• Reduced inspection exposure

Upgrading containment infrastructure improves long-term operational stability.

If you’re reviewing workshop systems or expanding capacity, speak with TWSA about compliant storage solutions across NSW.

A multi-bay alignment installation for an Automotive Dealership in Artarmon NSW.The setup includes:– Caizer W45 alignmen...
06/03/2026

A multi-bay alignment installation for an Automotive Dealership in Artarmon NSW.

The setup includes:
– Caizer W45 alignment hoist
– Hofmann Geoliner 678 alignment system

The configuration provides stable vehicle positioning, precise camera-based measurement, and digital reporting capability across multiple bays.
Installed as an integrated system, the alignment setup supports:

• Consistent measurement accuracy
• Improved technician workflow
• Higher bay utilisation
• Reduced rechecks

When alignment systems are paired correctly with the supporting hoist platform, performance and efficiency improve long-term.

If your dealership or workshop is reviewing alignment equipment ahead of EOFY, TWSA delivers engineered installation and integration across NSW.

Running older hoists in your workshop?From recent hoist replacement projects in Albion Park NSW, one thing is consistent...
10/02/2026

Running older hoists in your workshop?

From recent hoist replacement projects in Albion Park NSW, one thing is consistent:

waiting too long to replace ageing hoists often leads to more downtime, safety concerns, and compliance challenges.

Hoist replacement isn’t just about new equipment.
It’s about keeping service bays safe, efficient, and operational.

At TWSA, we handle hoist replacements end to end — planning installations around workflow and minimising disruption to daily operations.

If your hoists are starting to show their age, it may be time to review them.

Completed in Albion Park, NSW: supply and installation of two new vehicle hoists as part of an aged hoist replacement fo...
05/02/2026

Completed in Albion Park, NSW: supply and installation of two new vehicle hoists as part of an aged hoist replacement for an automotive service workshop.

This project included:

- Rotary HD-9 two-post hoist (9,000 Lb capacity)
- Caizer T46 clear-floor two-post hoist (4,600 kg capacity)
- Electrical reconnect coordination
- Compliance documentation and structured handover
- 24-month hoist warranty

Replacing ageing hoists helps workshops reduce downtime, meet Australian Standards, and keep service bays operating reliably during high-demand periods.

If your workshop is running older hoists or planning a staged hoist upgrade, this is the type of vehicle hoist installation we deliver across NSW—from supply through to installation and compliance.

Address

2/8 Blackmore Road Smeaton Grange
Wollongong, NSW
2567

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

1300871711

Alerts

Be the first to know and let us send you an email when Total Workshop Solutions Australia P/L posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Total Workshop Solutions Australia P/L:

Share

Total Workshop Solutions Australia

Total Workshop Solutions Australia was established in January, 2015. We are an Australian owned and operated company. Commencing in Sydney, after 20 years of involvement within the Automotive Industry and gaining the understanding that most Customer’s are disappointed with the Service being offered to them in our industry, TWS Australia opened the doors as a business that is a Service Provider that supplies Equipment, rather than a Sales Company that undertakes service by necessity.