Tin God Solutions

Tin God Solutions No DM’s ❌ By appointment only. Please email [email protected] for all inquires.

A set of interceptors modified to fit HT/HK Holden. The vehicle was fitted with late model Commodore brakes that keeped ...
26/01/2026

A set of interceptors modified to fit HT/HK Holden. The vehicle was fitted with late model Commodore brakes that keeped the Commodore stud pattern. We adjusted the offset and widened the rear. To maintain a classic look, we created custom hubcap clips that allow the use of the original 14” hubcaps. To the untrained eye, it appears they are still 14” wheels, even though they are actually 15”. This change also provides a much better selection of tires.

If it doesn’t rain, it pours! Here’s another set of BBS RS wheels for Tom’s E30. These wheels were built to larger specs...
23/01/2026

If it doesn’t rain, it pours!

Here’s another set of BBS RS wheels for Tom’s E30. These wheels were built to larger specs that were a bit too extreme for this build. There were also some questionable methods used in their construction.

We managed to shuffle the halves around so that Tom only needed two new halves to reduce the width. We stripped the centers, color-coded them to match the car, and performed a full polish on the hoops and hexes.

Unfortunately, I got a new phone and lost some photos of the build, but here are a few pictures of them completed on the car for your viewing.

BBS RS wheels are in for a tidy-up. To maintain their original look, we decided to leave the original paint on them and...
22/01/2026

BBS RS wheels are in for a tidy-up.

To maintain their original look, we decided to leave the original paint on them and simply polish the lips and hexes. We also cleaned up the original hardware; however, some pieces were beyond repair, so we sourced better replacements from our stash of BBS parts.

Set of two-piece welded for . These wheels were in pretty rough shape, but we believed we could give them new life. Th...
21/01/2026

Set of two-piece welded for .

These wheels were in pretty rough shape, but we believed we could give them new life. The centers were removed, any damaged rims were welded up and polished, while the centers were v***r blasted and painted a satin silver. The centers were then rewelded back in to create custom offsets to suit the vehicle, and we finished them off with new valves, tyres and refurbished imitation hardware.

80 Series Steel Wheels - WidenedThese wheels feature what we refer to as a large face. Usually, a center is welded into ...
20/01/2026

80 Series Steel Wheels - Widened

These wheels feature what we refer to as a large face. Usually, a center is welded into the “well” of the wheel, but with these larger face wheels, the center is welded to the front edge or may even be integrated into the front of the wheel. This design makes achieving custom widths and offsets more challenging.

We machined the original centers to fit inside some 16x10 wheels, creating custom offsets for an OEM+ look on this clean 80 Series.

jaguar coupe fitted with custom 3-piece convert OEM steelies. Steeped from the original 15-inch out to 17-inch. Finish...
19/09/2025

jaguar coupe fitted with custom 3-piece convert OEM steelies. Steeped from the original 15-inch out to 17-inch. Finished off with some all round, check the last slide to see the LS2 powering this super cool ride.

3-piece converted VW 5x205 smoothies in 17x5 and 17x7. We are not taking any more bookings for 3p converted VW wheels th...
17/08/2025

3-piece converted VW 5x205 smoothies in 17x5 and 17x7. We are not taking any more bookings for 3p converted VW wheels this year. When we do, they start at $5500 a set of four. They are only 17, and no, we won't only sell you centres. .

Mark this one in your calendars! Come find a bargain or even bring some stuff to sell.
07/08/2025

Mark this one in your calendars! Come find a bargain or even bring some stuff to sell.

Crazy set of RS in measuring 15x10 and 15x13 in original specs. Lips and hex’s polished, center chips cleaned and poli...
02/08/2025

Crazy set of RS in measuring 15x10 and 15x13 in original specs. Lips and hex’s polished, center chips cleaned and polished and centers chemically stripped and painted silver. First person to guess what these came on gets free sticker pack shipped to your door!

BBS E05 in for a tidy up. These had seen a lot of abuse from a rattle gun over many track days. With a lot of work they’...
02/08/2025

BBS E05 in for a tidy up. These had seen a lot of abuse from a rattle gun over many track days. With a lot of work they’ve come out surprisingly well.

Pair of American Racing Daisy’s narrowed from 15x8 down to 15x5. These are machined to slot into each other, welded both...
01/08/2025

Pair of American Racing Daisy’s narrowed from 15x8 down to 15x5. These are machined to slot into each other, welded both sides and the rear weld smoothed.

Chaser Steelies fitted to this T6 transporter in 20x8 and 20x9. Painted in Mazda grey with custom hub rings to suit.
31/07/2025

Chaser Steelies fitted to this T6 transporter in 20x8 and 20x9. Painted in Mazda grey with custom hub rings to suit.

Address

WarburtonHwy
Yarra Junction, VIC
3797

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 12pm

Website

Alerts

Be the first to know and let us send you an email when Tin God Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tin God Solutions:

Shortcuts

Share