MYK Bangladesh-BECL, Jamuna House, House-13/14, Road-2, Noor Mosjid Lane, Shamoly, Dhaka (2026)

22/12/2025

: (Multipurpose Waterproof Coating)
: AquaArm TG is a cementitious, polymer dispersion based flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moisture and abrasion. Its liquid mixing component is solvent free. AquaArm TG is a stand-alone product. It can be top or over coated with flexible or rigid mortars, stuccos or coatings for uniform appearance.
:
 Balconies, Chajjas
 Toilet / Bathrooms
 Roof & Terraces
& Benefits:
 Breathable
 Flexible
 Self-Curing.
Please visits: www.bhuiyanbd.com
01722288555
゚゚

22/12/2025

: (Non-shrink, cementitious repair concrete)
: ReArm Crete MC is ready to use single component dry powder cementitious material. It is supplied as a pre- blended polymer modified dry powder the addition of recommended water at the site to produce a non shrink free flowing high strength micro concrete. This is specially designed for repair to damaged reinforced concrete. It is suitable for use in wide range of repairs, pavements, ramps etc.
:
 Strengthening of vertical columns.
 It is mainly recommended for the repair of damaged concrete structures: columns beams, slabs etc.
 It is also recommended for grouting of large gaps.
& Benefits:
 It is a properly designed concrete
 It can be pumped or poured into restricted reinforced concrete
 The high workability of the micro concrete does not require vibration
 Rapid strength development
 Good bonding properties with old concrete
 Pre-packed which gives better results.
Please Visits: www.bhuiyanbd.com
01722288555
゚ # ゚

22/12/2025

Hard L Clear: (Chemical consolidating agent for concrete and screeds).
:
FloArm Hard L Clear is a low viscosity liquid based on lithium silicate. FloArm Hard L Clear penetrates deeply into the surface zone of concrete and cementitious screeds and reacts to form insoluble calcium silicate hydrate in the existing pores. Treated
surfaces have a matt sheen and reduced porosity.
:
 Increasing hardening
 Continuously rising abrasion resistance
 Intensified sheen and colour
 Inhibits crack formation
 Weather resistant
 Inhibits frost damage
 Water vapour permeable
 VOC free
 No surface protection necessary.
:
FloArm Hard L Clear is used for the durable hardening of cementitious areas e.g. in
 Production areas
 Storage areas
 Cool rooms
 Car parks
 Aircraft hangars
 Warehouses
 Food industry.
;
www.bhuiyanbd.com;
# ゚

22/12/2025

: (Solvented Epoxy Resin Primer).
:
FloArm Primer EP is a two component resin based solvent based epoxy resin primer with good penetrating properties for dense concrete surface.
:
 For priming concrete substrates, that will be coated with epoxy self levelling, Epoxy coating and epoxy screeds.
 For sealing cement based surfaces in production areas, warehouses and ramp areas
 Primer for the Arment floor resin systems.
 Binder for levelling mortars and mortar screeds.
:
 Solvented base
 Low viscosity
 Good penetrating property in concrete
 Excellent bond strength
 Easy application
 Short waiting times
 Watertight
 Resistant to dilute alkalis, acids, aqueous salt solutions, lubricants.
;
www.bhuiyanbd.com;
# ゚

22/12/2025

:
(High thermal Reflectance & Emittance coating)
Product Description:
AquaArm Ultra Coat is a single component, water based, high thermal reflectance & emittance coating, it has the ability to reflect the visible, infrared and ultraviolet rays. It significantly lowers the surface temperature of roofs and structural exteriors.
Uses:
 Certified green buildings
 Commercial and residential buildings
 Industrial sheds and godowns
 Concrete & metal storage tanks
 Cold storages and Warehouses
Features & Benefits:
 Single component
 Ready to use
 Non-toxic, High emissivity
 Green building compliant
 Washable
www.bhuiyanbd.com
01722288555
# ゚

22/12/2025

: (Oil Emulsion Based Form Release Agent).
: Armix Form FR3 is a ready-to-use water emulsion based on non-toxic, non-irritant, vegetable and mineral oil form release agent suitable for vertical and horizontal applications, and used in all kinds of form systems for obtaining aesthetic surfaces.
Armix Form FR3 has been specially formulated to give an easy and complete release of the concrete from the forms and a significantly improved quality of the concrete surface which is smooth, homogeneous and free of pin-holes.
:
 Armix Form FR3 is well suited for shutter faces made from wood, steel, aluminium & polyester or plywood molds where excellent surface finish and optimum release are required.
 RCC structures
 Prestressed & precast.
:
Armix Form FR3 is safe and eliminates many health and environmental risks as compared to the traditional form release agents and thus can be used with the maximum confidence by the workers on the job site.
 Enables easy stripping of form and reduces cleaning of form by reducing adhesion between formand concrete.
 Extends usage period of the form.
 Highly reduces holes and surface errors on concrete surface, enables obtaining aesthetic surfaces.
 Reduces corrosion risk on the form.
 Eliminates enviroment and health risks
 Does not cause stains or color differences on concrete surface.
visit: www.bhuiyanbd.com;
Call: 01722288555;
゚

22/12/2025

: (High thermal Reflectance & Emittance coating),
:
AquaArm Kool Roof is a single component, water based high thermal reflectance & emittance coating, It has the ability to reflect the visible, infrared and ultraviolet wavelengths of the sun, thereby reducing heat transfer to the building / structure,
which significantly lowers the surface temperature of your roof and structural exteriors.
:
AquaArm Kool Roof is thermal reflective and emittance\coating for building and structure. Application areas include:
 Certified green building,
 Commercial and residential Buildings,
 Industrial sheds and go downs,
 Concrete and Metal storage tank,
 Cold Storages and Warehouses
:
 Single component
 Ready to use
 Nontoxic, High emissivity
 Green building compliant
 Washable.
visit: www.bhuiyanbd.com;
Call: 01722288555;
゚

22/12/2025

: (Zinc Rich Epoxy Primer)>
:
FloArm Coat ZP is a two component system based on metallic Zinc and Epoxy resin system.
:
FloArm Coat ZP is a two-component anti-corrosion primer for reinforced steel in concrete as well as structural repair. it actively resists corrosion within the confines of the repair location.
: as a primer on reinforced bars for anticorrosive system and in concrete repairs. Also, can be used on exterior surfaces as a coating of
 Machinery,
 Fertilizers tanks,
 Metal Structural girders,
:
 Zinc rich system combats corrosion by electrochemical
 Permanent protection to the steel structure
 Excellent adhesion and flexibility to steel
 Time Saving-touch dry after 35 to 40 Minutes
 Exhibits excellent bond strength in cementitious.
visit: www.bhuiyanbd.com;
Call: 01722288555;
゚

22/12/2025

: (Three-component, solvent-free, high performance, free-flowing epoxy grout).
:
ArmGrout EP-100 is a three-component, solvent free, non-shrink, high performance, epoxy-resin, free flowing grout for gaps of 10 mm to 100 mm. ArmGrout EP-100 is based on a selection of epoxy resins, curing agents, hard & inert aggregates that when mixed provide a group of excellent adhesion with high early and final compressive & mechanical strengths, in addition to good chemical resistance.
:
ArmGrout EP-100 is typically used to grout: under machinery plates exposed to high dynamic loads or vibrations under machinery that will be exposed to chemical attack
• Under bridge bearing pads
• Crane rails
• High strength anchoring bolts
• Large area cavities in concrete.
:
• Easy to mix and apply
• Solvent-free; 100 % solids
• Non-shrink curing ensures full adhesion
• Excellent flow ability
• Rapid strength development
• Excellent chemical resistance & durability
• Suitable for application on damp or dry substrates.
visit: www.bhuiyanbd.com;
Call: 01722288555;
゚

22/12/2025

: (Low viscous epoxy resin injection Grouting material).
:
ArmGrout Inject EP is a two part epoxy resin system for grouting gaps ranging from 0.3 mm to 10 mm. It is a two part system consisting of a base and hardener.
:
This is the most ideal product for repairs and rehabilitation of structures showing hair line cracks.
It is used to fill up cracks in roof slabs and other areas to make them structurally sound.
:
 Moisture insensitive
 Low creep characteristics
 High compressive, tensile and flexural strengths
 Fast, convenient pumping,
 Withstands a wide range of chemicals.
visit: www.bhuiyanbd.com;
Call: 01722288555;
゚

18/12/2025

: (Elastic 1K PU joint sealant).
:
SealArm PU is a one component, medium-modulus pigmented polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all construction materials. The sealant possesses movement capability of 25% and conforms to BS 6920 for the metallic water soluble impurities and is suitable for use in drinking water system. It meets the test requirements of ASTM C-920, Type S, Grade NS, Class 25.
:
SealArm PU is used as a joint sealant for floor joints in heavy duty areas e.g. industrial areas, breweries, dairies, commercial kitchens, balconies, terraces as well as between concrete elements. It seals expansion and control joints, pre-cast concrete panel joints, window perimeters, steps, risers, roof and tilt wall joints.
:
 Single component – minimizes wastage
 Easy to apply
 Light and UV stable characterized by high elasticity. Possesses good resistance to dilute acids and alkalies, salt solutions, neutral waterbased cleaners as well as hot oils and fats.
web: www.bhuiyanbd.com;
Cell: 01722288555;
゚

MYK Bangladesh-BECL

22/12/2025

22/12/2025

22/12/2025

22/12/2025

22/12/2025

22/12/2025

22/12/2025

22/12/2025

22/12/2025

22/12/2025

18/12/2025

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category