Fixings Megastore

10/10/2025

Choosing the correct grade of fastener for the job!

Why Steel Grade Matters in Fasteners Fasteners — bolts, nuts, screws, and washers — may be small, but they are essential to the strength and safety of every structure or machine. Their performance depends largely on the grade of steel used. Choosing the correct fastener grade ensures durability,...

06/08/2021

M42 nyloc nuts now in stock.

11/05/2021

Threaded bar is available in sizes from M2 to M42 in zinc plating, galvanise, stainless steel, brass and self colour. Available in lengths of 1m, 2m and 3m, we can also provide cut to size if required.

https://www.fixingsmegastore.co.uk/threaded-bar

17/03/2021

Website down? We're currently moving to a shiny new server. This may result in some small downtime over the next 24 hours while the internet does it's thing.

03/03/2021

Fixing into a girder cavity or box section is no longer a problem. Drill the hole and fix the bolt inside. Then using a screwdriver to twist the head will cause the anchor to drop. The simply tighten the nut where required to fix the anchor.in place.

25/02/2021

JFEA300SF Polyester resin is a general purpose resin for use in solid concrete, brickwork and natural stone, and hollow materials using a suitable sleeve.

23/02/2021

These 100mm heavy duty square plate washers with a 25mm square hole are for use with M24 holding down bolts. This version is 6mm thick for increased load bearing

Available at www.fixingsmegastore.co.uk

22/02/2021

Ankerbolts are a ETA approved economical version of the well known Thunderbolt branded product. Available as a hex head, fl**ge head, countersunk torx or pan head fitting.

These are manufactured in zinc plating, galvanised and stainless steel finishes.

18/02/2021

Sleeve anchors are the ideal fixing for installing steel products to brickwork. They are similar to throughbolts with the exception of an added sleeve that helps into the brick when the nut or bolt head at the top is tightened.

www.fixingsmegastore.co.uk/sleeve-anchors

17/02/2021

Penny or mudguard washers are those that have a larger outer diameter than a usual specified DIN washer. These are usually available with hole sizes starting at M5 up to M12, and with outer diameters ranging from 20mm to 50mm.

We keep these all in stock, available to order from www.fixingsmegastore.co.uk