Stuart Mitchell Knives

08/05/2026

Available - #1432

Let’s glow all the way: P120 in SF100, 3mm stock, HRC 60/62, with the usual superb stonewashed finish on the steel.

Handle scales are blue/black Norplex SureTouch™ over Edgy Supplies Amethyst TurboGlow GITD liners.

SureTouch™ is a revolutionary, patent-pending process that combines G-10 layers with rubber, enabling the toughness and durability of G-10 with the grip and anti-slip properties of rubber, in one material.

Supplied in the outstanding Kydex sheath with Cordura drop loop as shown.

If you would like to discuss owning #1432, or potentially commissioning something similar, please feel free to drop me a line through my website: www.stuartmitchellknives.com/contact

31/03/2026

Bradley Morris...
.. I can see your messages and screenshots but Facebook won't allow me to message you back.

You could try through the website: www.stuartmitchellknives.com/contact

Although I have a small selection of standard patterns in my catalogue, the vast majority of what I make today are bespoke custom knives, working one-on-one with you to create the optimum knife for your needs and circumstances, be they field, kitchen or plate.

30/03/2026

Back in September, I started a project, a couple of traditional drop point hunter designs, I quickly realised their similarity to a couple of old Pat Mitchell back catalogue models, the 572 and 574.

I jokingly named them the 572/25 and 574/25. Here you see the smaller of the two, the 572/25.

3" blade of SF100, 1/8" stock with a tapering tang.

Stainless bolsters and a stunning section of Sambar cut for the scales. Those scales fitted over 0.4mm bright red liners.

The last photo shows a 572/25 blank beside an old catalogue photo of the original 572.

Leather sheath to follow.

19/03/2026

#1425; P90 in SF100, 3mm stock, HRC 60/62 with a superb stonewashed finish to the blade.

Handle scales are of Norplex Absolute Zero blue G10, those fitted over GPS Agencies Ltd Neon Blue Starlight GITD liners.

The premium Wilebore Leather is also of outstanding quality and bomb proof.

This fine example of glowy goodness is NOW SOLD on my website: www.stuartmitchellknives.com/available

03/03/2026

The latest three Secare.

Secare is a hard-use, no-nonsense, GP utility model. As such, it gets 5mm stock SF100 Sheffield steel.

Full flat grinds with edges of 110mm.

All get handle scales of TeroTuf, blue, lilac and orange. Here is a little product info from their own website: CIP TeroTuf, originally designed as a wear material for industrial use, was introduced to the knife industry as a new option for handles. This material has quickly become a preferred alternative to many other utilitarian handle options. TeroTuf is made with 100% polyester resin and fabric with no fillers, is non-toxic, chemically resistant to most cleaning supplies, and does not swell in water.

All three for the same client, with a splash of red tying the three together.

Scales are secured by a trio of flared 8mm stainless steel tubes.

Custom-made Heathen Kydex sheaths to keep them safe and secure, the sheaths featuring Kydex/Cordura drop belt loops.

Similar builds would be priced at £495 each.

23/01/2026

Another stunner; P90 in SF100, 3mm stock, HRC 60/62 with a superb stonewashed finish to the steel 🔪

Handle scales are green Norplex canvas Micarta over neon green TurboGlow GITD liners. Thanks to Edgy Supplies for the materials 🙏🏻

The premium Wilebore Leather sheath is also of outstanding quality and is totally bomb proof 💣

It is my first time using these particular liners and I am very impressed, the majority of the photos were taken outdoors at around 09:00 this morning, the last photo shows those GITD liners in all their glowing glory 🌟

19/01/2026

Hot off the bench and a beautiful thing; P120 in SF100, 3mm stock, HRC 60/62 with a superb stonewashed finish to the blade.

Handle scales are Norplex Absolute Zero blue G10 over GPS Agencies Ltd Blue Starlight Glow GITD liners.

The premium Wilebore Leather sheath also gets blue stitching to complement.​

The last photo shows those GITD liners in all their glory.

01/01/2026

Kicking off 2026!

A few months ago, I was contacted by new clients after they had visited restaurant JÖRO here in Sheffield and used the knives that I supplied to there.

A few years previous a Sweet Chestnut tree lost the battle with a storm in their garden. If they brought a chunk in, might I be able to make them a carving set handled in their timber?

They brought a chunk, alright, it was a good 20" x 20" and maybe 10" thick (photo shows it after I had started cutting it).

P120 for scale, the section standing upright on top is the section I cut out to use.

The set was completed a couple of weeks ago, just in time for Christmas dinner.

22/12/2025

A stunning matched pair of my 4" steak/table knives, handled in stabilised Javan Rosewood.

Of particular note, this brace of knives is housed in a magnificent, waxed finish, South American bull hide leather roll. The interior of which features two hand-stitched, flapped pouches, one for each knife.

All in all, it is a totally exquisite piece of kit.

I am loving the idea of the double roll. I now think even a set of six would be better housed in three of these rather than one roll for all six. I imagine the theatre of having three (or however many) of these placed upon your set table, one between each couple of folk to share.

Headed for a nice weekend away, take a pair with you.

This set is sold, but please drop me a line through my website if you would like to discuss owning something similar.

www.stuartmitchellknives.com/contact

17/12/2025

A very traditional, 4" bladed, DP hunter profile.

SF100 steel, 1/8" stock, full width grinds and a tapering tang.

Bolsters are of 304 SS, secured by four 1/8" 304 SS pins (1/8" diameter 304 SS rod is becoming very difficult to source☹️, so I bought a lot😀).

Scales are of Axis antler, those fitted over thin red fibre liners and secured by a brace of SS Corby type bolts.

The sheath another Wilebore Leather stunner, more South American, veg-tanned, bull hide with a light wax finish. Dark Walnut in colour.

A commissioned piece, so not for sale, please feel free to drop me a line though my website though if you would like to discuss owning something similar: www.stuartmitchellknives.com/contact

16/12/2025

#1399 is a classic pattern and specification MuntjaX.

MuntjaX features a 100mm blade, and this example is made from 3mm stock SF100 blade steel, heat-treated to a Rockwell hardness of 60/62. The blade is finished in a premium and very durable stonewash.

Full flat grinds with secondary bevels take it to a razor-like edge.

Black canvas Micarta scales secured by a brace of stainless steel Corby-type bolts.

The Wilebore Leather is handmade, hand-stitched and of premium grade, South American, veg-tanned, bull hide with a light wax finish. The colour is Dark Walnut.

They really are a stunning and totally fit for purpose design, its lines are so aesthetically pleasing.

This knife is currently offered for sale on my website: www.stuartmitchellknives.com/available