Multi-Hire Power Tools Limited

Multi-Hire Power Tools Limited Multi-Hire is an essential resource to the flooring industry, hiring a range of floor prep equipment Multi-Hire is the flooring contractor's essential resource.

We hire a massive range of floor preparation equipment including floor scrapers, grinders, scabblers, planers, sanders, shot blasters and small tools as well as a range of forced action screed and resin mixers. None of which can be matched, even by the Nationals. Multi-Hire sell a range of flooring equipment machines from a variety of manufacturers at below RRP. Multi-Hire sell a large range of hi

gh quality flooring consumables and accessories at prices unmatched by any distributor. Multi-Hire will repair any broken machines and tools, single or 3 phase electrical, diesel or petrol.

29/05/2026

TEAM BUILDING ๐ŸŽฃ

At the weekend some of the Multi-Hire team swapped grinders and hire kit for rods and reels and headed out onto the Mersey for a team day out ๐Ÿ‘

A few beers, plenty of laughs, some questionable fishing techniquesโ€ฆ and surprisingly a few catches too๐ŸŸ

The team even managed to bring in a couple of stingrays โ€” and Andy enjoyed it that much he took some fresh fish home to cook ๐Ÿ˜ฎ๐Ÿ”ฅ

Always good to get everyone together outside of work and enjoy some well-earned downtime.

Back to floors and machinery nowโ€ฆ although we might have discovered a new department ๐Ÿ‘€๐ŸŽฃ




28/05/2026

๐Ÿ”™

Taking it back to this one with the HTC 500 putting in the work removing multiple layers of paint ๐Ÿ‘€

When it comes to heavy coatings and stubborn surfaces, sometimes a scraper just isnโ€™t the right tool for the job ๐Ÿ‘Š

For thicker build-ups and bonded coatings, grinding can often be the more effective option โ€” especially when paired with the correct tooling ๐Ÿ’ช

This HTC 500 was fitted with standard 30 grit grinding shoes, making light work of three layers of paint ๐ŸŽฏ

Need something more aggressive?
We also stock:
โœ” Lower grit metal bond shoes
โœ” PCD tooling for stubborn coatings
โœ” A full range of grinding accessories for different floor types

The right tooling setup can make all the difference to productivity and finish quality ๐Ÿ‘Œ

๐Ÿ”— https://www.multi-hire.co.uk/product-category/diamond-grinding-shoes/

๐Ÿ“ž 03455 613633

SMART FLOOR WEDNESDAY ๐Ÿ‘ŠThe prep work gets the floor readyโ€ฆ but the finish is what people remember ๐Ÿ‘€Clean reflections. Sm...
27/05/2026

SMART FLOOR WEDNESDAY ๐Ÿ‘Š

The prep work gets the floor readyโ€ฆ but the finish is what people remember ๐Ÿ‘€

Clean reflections. Smooth finish. Long-lasting performance ๐Ÿ’ช

High-quality floor systems donโ€™t just look good on day one โ€” theyโ€™re built to handle everyday wear while keeping that professional finish ๐Ÿ‘Œ

Whether itโ€™s polished concrete, resin systems or decorative flooring, the right products and preparation make all the difference.

A finish like this speaks for itself ๐Ÿ‘

๐Ÿ“ž Get in touch to discuss the right flooring system for your next project






26/05/2026

ON SITE TUESDAY ๐Ÿ‘Š

Here we have MJF installing a high-quality Vebro MMA quartz system for their emergency services site in Whitefield ๐Ÿ‘€

A project where performance and durability are just as important as the prep work ๐Ÿ’ช

For this one, the team used our HTC 500 triple head grinder โ€” a solid, reliable machine built for efficient surface preparation and consistent results on site ๐Ÿ‘Š

MJF had this to say about the project:

โ€œThanks to Multi Hire for their solid workhorse prep machinery, MJF, 3LR Resin Systems, and Vebro for another high end job for our emergency services with Roberts Construction.โ€ ๐Ÿ™Œ

Big thanks to the team for sending this one over ๐Ÿ‘Œ

Itโ€™s always great seeing our machines being used on high-spec commercial flooring projects like this.

๐Ÿ“ Nationwide delivery available
๐Ÿ“ž Get in touch to discuss the right prep setup for your next project





Just a reminder that Multi Hire are closed today for the 25th May Bank Holiday โ˜€๏ธWeโ€™ll be back open as normal on Tuesday...
25/05/2026

Just a reminder that Multi Hire are closed today for the 25th May Bank Holiday โ˜€๏ธ

Weโ€™ll be back open as normal on Tuesday 26th May.

In the meantime, we hope everyoneโ€™s enjoying the sunshine and having a well-earned break ๐Ÿ˜Ž

Weโ€™ll reply to all enquiries as soon as weโ€™re back in the office.

FAQ FRIDAY ๐Ÿ‘ŠIs shot blasting better than floor grinding for floor preparation? ๐Ÿ‘€The answer really depends on the job.Sho...
22/05/2026

FAQ FRIDAY ๐Ÿ‘Š

Is shot blasting better than floor grinding for floor preparation? ๐Ÿ‘€

The answer really depends on the job.

Shot blasting is ideal for:
โœ” Removing coatings & paint lines
โœ” Fast prep on large floor areas
โœ” Creating a consistent keyed profile
โœ” Efficient commercial & industrial floor prep

Whereas grinding is often the better option when:
โœ” Levelling uneven concrete
โœ” Removing laitance
โœ” Smoothing and refining the surface
โœ” Preparing floors for polished finishes

Both methods have their place โ€” it comes down to the condition of the floor and the finish youโ€™re trying to achieve ๐Ÿ‘Š

Not sure which setup is right for your project?
๐Ÿ“ž Get in touch and weโ€™ll help point you in the right direction.





21/05/2026

THROWBACK THURSDAY ๐Ÿ”™

Taking it back to this one with our ride-on floor scraper in action ๐Ÿ‘€

A last-minute call from with a seriously tight turnaroundโ€ฆ

A supermarket floor covered in vinyl plank needed ripping up and the floor completed before new fridges arrived the next day ๐Ÿ˜…

A push-along scraper had already been tried with little success, so they needed something bigger โ€” and fast ๐Ÿ’ช

Luckily, we had a ride-on machine fully charged, ready to go and delivered to site by lunchtime ๐Ÿ‘Š

The result?
โœ” Floor stripped
โœ” Deadline met
โœ” Job completed with hours to spare

Sometimes having the right machine at the right time makes all the difference ๐Ÿ‘Œ

Weโ€™ll always do our best to keep your projects moving ๐Ÿ™Œ

๐Ÿ“ Nationwide delivery available
๐Ÿ“ž Get in touch to discuss the right setup for your next project

SMART FLOOR WEDNESDAY ๐Ÿ‘ŠThis week weโ€™re spotlighting Crete Colors C2 Pin Fix.Designed for repairing and stabilising pinho...
20/05/2026

SMART FLOOR WEDNESDAY ๐Ÿ‘Š

This week weโ€™re spotlighting Crete Colors C2 Pin Fix.

Designed for repairing and stabilising pinholes, air holes and small surface imperfections in concrete, C2 Pin Fix helps create a smoother, cleaner finish before the final stage ๐Ÿ’ช

Perfect for polished concrete and decorative flooring systems where detail matters ๐Ÿ‘Œ

๐Ÿ”ง Why contractors use it:

โœ” Helps fill pinholes & minor surface voids
โœ” Improves final floor appearance
โœ” Ideal for polished concrete systems
โœ” Fast and easy application
โœ” Supports a smoother final finish

Sometimes itโ€™s the small details that make the biggest difference in the finished floor...




19/05/2026

Out on site with the NFE A99 Shot Blaster putting in the work on a warehouse floor ๐Ÿ‘€

This setup was used to remove old paint lines quickly and efficiently โ€” leaving the surface clean and properly prepared for the next stage ๐Ÿ’ช

Shot blasting is ideal for jobs like this where you need:
โœ” Fast line removal
โœ” Consistent surface preparation
โœ” Minimal downtime on large floor areas
โœ” Efficient dust-controlled prep when paired with the right vacuum system

The self-propelled A99 is built for high-output work, making it a solid choice for warehouses, factories and large commercial flooring projects ๐Ÿ‘Š

Big thanks for sending this one in ๐Ÿ™Œ

Got footage of our machines on site? Send it over โ€” we love seeing them in action ๐Ÿ‘€

๐Ÿ“ Nationwide delivery available
๐Ÿ“ž Get in touch to discuss the right setup for your next project





MH MONDAY โ€“ MACHINE FOCUS ๐Ÿ‘ŠThis week weโ€™re spotlighting one of the heavy hitters in surface preparationโ€ฆ ๐Ÿ‘€The NFE A99 La...
18/05/2026

MH MONDAY โ€“ MACHINE FOCUS ๐Ÿ‘Š

This week weโ€™re spotlighting one of the heavy hitters in surface preparationโ€ฆ ๐Ÿ‘€

The NFE A99 Large Flooring Shot Blaster โš™๏ธ

Built for large commercial and industrial floor prep jobs, the A99 is designed to strip, clean and profile concrete surfaces quickly and consistently ๐Ÿ’ช

With a 400mm blasting width and self-propelled drive system, itโ€™s ideal for high-output work across warehouses, factories, car parks and refurbishment projects.

๐Ÿ”ง Why contractors rate the A99:

โœ” Self-propelled for consistent coverage
โœ” Removes coatings, paint & contaminants
โœ” Creates the correct profile for new floor systems
โœ” High-output prep for large surface areas
โœ” Designed for commercial & industrial flooring projects

Shot blasting is a great option when you need fast, efficient preparation without the additional grinding stage ๐Ÿ‘Š

For best results, pair it with a high-capacity dust collector to keep recovery and dust control running efficiently.

๐Ÿ“ Nationwide delivery available
๐Ÿ“ž Get in touch to discuss the right setup for your project





Address

Warrington

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

+443455613633

Alerts

Be the first to know and let us send you an email when Multi-Hire Power Tools Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Multi-Hire Power Tools Limited:

Share