S-Ks Tools Corporation

S-Ks Tools Corporation Landline no. 2-8733-0377

S-Ks Tools Corporations is a wholesaler and retailer company that offers a wide variety of hardware items such as plumbing, mechanical, electrical tools, power tools and industrial products.

LICOTA UNIVERSAL VALVE REPAIR KIT -0039A. UNIVERSAL VALVE SPRING COMPRESSORB. VALVE COLLET REPLACERC. VALVE HOLDERD. 14...
23/05/2026

LICOTA UNIVERSAL VALVE REPAIR KIT
-0039

A. UNIVERSAL VALVE SPRING COMPRESSOR
B. VALVE COLLET REPLACER
C. VALVE HOLDER
D. 14/18mm COMPRESSED AIR ADAPTOR
E. VALVE STEM SEAL PLIERS
F. VALVE STEM INSTALLING

Universal Valve Repair Kit is an automotive engine service tool kit used for removing and installing engine valves and valve springs, often without removing the cylinder head from the engine. It is commonly used by mechanics during:
Valve stem seal replacement
Valve spring servicing
Cylinder head repair
Engine overhaul work

Main features
Heat-treated steel construction for durability
Can work with the cylinder head installed or removed
Large side openings for easier access to valve keepers
Uses compressed air to keep valves seated during repair
Typical use

Mechanics use it to:
Compress the valve spring
Remove valve keepers/locks
Replace valve stem seals
Reinstall springs and retainers
This helps fix:
Blue smoke from exhaust
Oil leaking into combustion chamber
Worn valve seals
Weak valve springs




LICOTA 5PCS BALL - JOINT SEPARATOR -2069*THREE FORGED STEEL FORKS.*INTERCHANGEABLE SHAFTS FOR USE WITH BALLPEIN HAMME...
23/05/2026

LICOTA 5PCS BALL - JOINT SEPARATOR
-2069

*THREE FORGED STEEL FORKS.
*INTERCHANGEABLE SHAFTS FOR USE WITH
BALLPEIN HAMMER OR AIR HAMMER
*SUITABLE FOR MOST SMALL CARS AND LIGHT
COMMERCIALS.

*INCLUDES:
1PC. 11/16" (17mm) TIE ROD SPREADER
1PC. 15/16" (24mm) BALL JOINT SPREADER
1PC. 1-1/8" (28mm) PITMAN ARM WEDGE
1PC. STRIKING HANDLE
1PC. AIR HAMMER ADAPTER

A ball joint separator is a tool used to separate a vehicle’s ball joint from the steering knuckle or control arm during suspension or steering repairs.

A ball joint is a pivot connection in a car’s suspension that allows movement while supporting the vehicle’s weight.

Common uses:
Replacing ball joints
Removing tie rod ends
Suspension repairs




HANS 6PCS SCREWDRIVER SET #06301-6MG360 degree free turn design3PCS FLAT SCREWDRIVER -4 5.5mm x 100mm L -6 6.5 x 150mm ...
23/05/2026

HANS 6PCS SCREWDRIVER SET
#06301-6MG

360 degree free turn design

3PCS FLAT SCREWDRIVER
-4 5.5mm x 100mm L
-6 6.5 x 150mm L
-4 6.5mm x 100mm L

3PCS PHILIP SCREWDRIVER
-4 PH1 x 100mm L
-6 PH2 x 150mm L
-4 PH2 x 100mm L





FUJI BIT HEX SHANK BULL POINT 17 X 280MM -280A hex shank bull point drill bit is usually called a hex bull point chisel ...
18/05/2026

FUJI BIT HEX SHANK BULL POINT 17 X 280MM
-280

A hex shank bull point drill bit is usually called a hex bull point chisel or pointed demolition bit. It’s used with demolition hammers, rotary hammers, or chipping guns for breaking concrete, masonry, and stone not for regular drilling.

Good for:
Concrete breaking
Chipping walls/floors
Demolition hammer applications
Long service life with Makita-compatible

Best for:
General construction
Small renovation work
Budget-friendly replacement bit

FUJI BIT HEX SHANK COLD CHISEL 17 X 280MM
-280

A hex shank cold chisel drill bit is a flat demolition chisel used with rotary hammers, chipping hammers, and demolition breakers for removing concrete, tile, masonry, and weld splatter. The most important things to check are shank size compatibility (17mm, 21mm, 28mm, or 30mm HEX), length, and whether you need light chipping or heavy demolition.

Good for:
Concrete surface removal
Tile and plaster chipping
Masonry channeling
Medium-duty demolition

Best for:
General construction
DIY renovation
Budget replacement bit






SKS MANUAL PIPE THREADE SET -T62-4 (1/2" - 1-1/4") (4) -T63 (1/2" - 2" ) (6)Manual ratcheting pipe threader set used fo...
18/05/2026

SKS MANUAL PIPE THREADE SET
-T62-4 (1/2" - 1-1/4") (4)
-T63 (1/2" - 2" ) (6)

Manual ratcheting pipe threader set used for threading GI (galvanized iron) pipes. Common sizes included are 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2".

*Ratcheting head for easier threading
*Long handle for higher torque
*Steel construction
*Portable carrying case
*Compatible with GI pipe threading work





OREX STAINLESS STEEL PROCTRACTOR -50001Length 8in.Thickness: 1.2mm0 degree - 180 degreeFeature*The measurement reference...
16/05/2026

OREX STAINLESS STEEL PROCTRACTOR
-50001
Length 8in.
Thickness: 1.2mm
0 degree - 180 degree

Feature
*The measurement reference lines are etched ,
so they will never wear down.
*The adjustable combination screws are all made
of stainless steel, making them resistant to deformation.
*The protractor is plated, making it wear-resistant and easy to read.
*By adding units of measurement to the bottom of the protractor, It can be used for measuring length.

Suitable for:
*Woodworking
*Ironworking and design work
*Can be used as a tool for precise angle measurement.
*Creating reference lines after angle measurement.
*The stellar bar can used for depth measurement.





LIGHT HAND RIVETER FREE SECTION HEADSWIVEL TYPE/ROTARY - HEAD TYPE -006Features:Complete with 4-nosepieces for settingbl...
13/05/2026

LIGHT HAND RIVETER FREE SECTION HEAD
SWIVEL TYPE/ROTARY - HEAD TYPE
-006

Features:
Complete with 4-nosepieces for setting
blind rivets up to 4.8mm - 3/16" dia. with service
wrench for the eventual change of nosepieces.

*Swivel head allows use in any position
*Long handle for extra leverage

2.4 3.2 4.0 4.8
3/32" 1/8" 5/32" 3/16"
Alumialloy, Steel, Stainless





HANS 1/2" DRIVE 11PCS RE-CHANGEABLE OPEN ENDHEAD TORQUE WRENCH1PC TORQUE WRENCH 40-210NM1PC RATCHET HEAD9PCS OPEN HEAD P...
12/05/2026

HANS 1/2" DRIVE 11PCS RE-CHANGEABLE OPEN END
HEAD TORQUE WRENCH
1PC TORQUE WRENCH 40-210NM
1PC RATCHET HEAD
9PCS OPEN HEAD PLUG 13,14,15,17,19,22,24,27,30mm

An 11-piece re-changeable (or interchangeable) torque wrench set is a professional-grade tool kit designed for precise tightening of nuts and bolts, particularly in automotive and industrial applications. It features a single, adjustable torque handle that accepts various interchangeable heads—such as open-ended spanners or a ratchet head—allowing one tool to handle multiple fastening sizes and types.

Interchangeable Heads: Typically includes a 1/2" drive ratchet head and a variety of open-end spanner heads (e.g., 13mm to 30mm).Torque Range: Commonly covers a range suitable for heavy-duty work, such as 40-210Nm or 20-210Nm, with a micro-adjustable scale.Precision and Safety: Engineered to ensure fasteners are tightened to specific specifications, preventing over-tightening. It produces a tactile/audible click when the preset torque is reached.Material: Constructed from high-strength chrome vanadium steel.Set Content: Usually packaged in a blow-molded case for organization and portability.

Common ApplicationsAutomotive Repair:
Engine work, wheel fastening, and suspension, where exact torque specifications are required.Industrial Maintenance: General assembly, machinery maintenance, and piping.Use Cases: Ideal for scenarios where a standard socket cannot reach a nut, making open-end heads necessary.



HEADORQUEWRENCH
#4673

HANS RATCHET STRUCTURAL WRENCH #1140Size:10 x 12mm12 x 14mm14 x 17mm17 x 19mm17 x 21mm 19 x 21mm21 x 23mm22 x 24mm24 x ...
12/05/2026

HANS RATCHET STRUCTURAL WRENCH
#1140
Size:
10 x 12mm
12 x 14mm
14 x 17mm
17 x 19mm
17 x 21mm
19 x 21mm
21 x 23mm
22 x 24mm
24 x 27mm
26 x 29mm
27 x 30mm
27 x 32mm
30 x 32mm
32 x 36mm

A ratchet structural wrench (or spud wrench) is a heavy-duty, two-in-one industrial tool designed for steel er****on and scaffolding. It features a ratcheting box end for rapid bolt tightening without removing the tool and a tapered handle for aligning structural steel holes. These tools are essential in construction for assembling framework, bridges, and tower scaffolding.




HANS CLICK TORQUE WRENCHWITH CALIBRATION CERTIFICATE*MICRO-CLICK TORQUE WRENCH*3170GI 3/8" DRIVE X 40-250 IN. LB. 14"317...
12/05/2026

HANS CLICK TORQUE WRENCH
WITH CALIBRATION CERTIFICATE

*MICRO-CLICK TORQUE WRENCH*
3170GI 3/8" DRIVE X 40-250 IN. LB. 14"
3171GF 3/8" DRIVE X 15-80 FT.LB. 15"
4170GF 1/2" DRIVE X 30-150 FT. LB. 21"

*CLICK TORQUE WRENCH*
4170NF 1/2" DRIVE X 30-150 FT. LBS. 18"
4171NF 1/2" DRIVE X 50-250 FT. LBS. 25"
6170NF 3/4" DRIVE X 50-300 FT. LBS. 33"
6172NF 3/4" DRIVE X 100-600 FT. LBS. 42"
6173NF 3/4" DRIVE X 100-700 FT. LBS. 48"
8170NF 1" DRIVE X 100-700 FT. LBS. 48"
4175NM 1/2" DRIVE X 19-110 Nm 14"
4170NM 1/2" DRIVE X 40-210 Nm 18"
4171NM 1/2" DRIVE X 70-350 Nm 25"
6170NM 3/4" DRIVE X 65-450 Nm 33"
6171NM 3/4" DRIVE X 140-700 Nm 42"
6173NM 3/4" DRIVE X 149-980 Nm 48"
8170NM 1" DRIVE X 140-980 Nm 48"

*PROFESSIONAL MICRO-CLICK TORQUE WRENCH*
6175GF 3/4" DRIVE X 200-1000FT. LBS 67"
6175GN 3/4" DRIVE X 300-1500Nm 67"
8175GF 1" DRIVE X 200-1000FT. LBS 67"
8175GN 1" DRIVE X 300-1500Nm 67"

*PROFESSIONAL CLICK TORQUE WRENCH*
8176NF 1" DRIVE X 400 - 2000FT-LBS 110"
8176NM 1" DRIVE X 500 - 2500Nm 110"

A click torque wrench is a specialized tool designed to apply precise force to bolts or nuts, ensuring components are neither too loose nor overtightened. Its hallmark feature is the audible “click” it produces when the desired torque is achieved, making it both accurate and user-friendly.





SKS CANTILIVER METAL TOOL BOX -B -SSize:20" x 8" x 8"17" x 8" x 8"Cantilever Metal Tool Box is a heavy-duty steel to...
11/05/2026

SKS CANTILIVER METAL TOOL BOX
-B
-S

Size:
20" x 8" x 8"
17" x 8" x 8"

Cantilever Metal Tool Box is a heavy-duty steel toolbox designed with fold-out trays that open automatically using a cantilever mechanism. It is popular among mechanics, electricians, technicians, and industrial workers because it gives quick access to tools without digging through one compartment.

*Heavy-duty metal steel construction
*5-tray cantilever opening system
*Portable carry handle
*Wide bottom compartment for larger tools
*Easy-access folding trays
*Suitable for professional and workshop use




Address

653 Florentino Torres Street Santa Cruz
Manila
1003

Opening Hours

Monday 9am - 4:30pm
Tuesday 9am - 4:30pm
Wednesday 9am - 4:30pm
Thursday 9am - 4:30pm
Friday 9am - 4:30pm
Saturday 9am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when S-Ks Tools Corporation posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to S-Ks Tools Corporation:

Shortcuts

Share

Category