Taiwan Simco Company

04/09/2026

Cutting springs made from larger-diameter wire or higher-tensile-strength material generally requires greater cutting force. Running a motor above its rated power capacity causes overheating and accelerates wear on transmission parts, thus reducing overall machine longevity.

The YT-140’s joint-assisted cutting mechanism leverages intelligent mechanical geometry to increase cutting force rather than relying on brute electrical power. By prioritizing effective force transmission over raw power delivery, this design enables the motor to operate at a significantly lower peak load during high-strength cutting.

For example, peak motor load reaches 172.6% on the conventional system, while it is limited to 134.7% on the YT-140 equipped with joint-assisted cutting.

To know more: [email protected]

01/09/2026

From Production Bottlenecks to Scalable Growth


"I am satisfied with the machine as it has very good quality... The service has been excellent, from the purchase through to machine adjustment support." — Jorge Aldaz

Hearing this wonderful feedback from our client Jorge Aldaz in Mexico makes us proud of this partnership.

Before implementing SIMCO machines, part production at Jorge’s facility was handled manually. This created limitations in process stability, required more direct labor, and restricted their capacity to take on new projects.

After adopting SIMCO spring formers, the production process became automated and significantly more stable. This allowed them to reallocate labor to other operations, reduce operating costs, improve delivery reliability, and unlock additional production capacity.

At SIMCO, our greatest achievement is our clients' success. Seeing them expand from one to three SIMCO machines, is the best confirmation of our quality.

Thank you to our valued partners for your trust. We look forward to reaching many more milestones together!

Get your custom solution: [email protected]

27/08/2026

To address the challenges of high stress and springback in flat wire forming, SIMCO offers high-precision wire guides and custom tooling as solutions.

SIMCO can custom-engineer the inner channel depth of wire guides down to under 0.01 mm. This creates a near-zero-gap constraint channel that perfectly guides your flat wire, eliminating the risks of twisting and flipping.

This ensures a smooth, perfectly straight feed into the forming zone, dramatically boosting the precision and consistency of your finished springs.

Contact to grab your solutions: https://www.simcotw.com/contact-us?utm_source=linkedin&utm_medium=social&utm_campaign=global_inquiry

25/08/2026

Last week, the SIMCO team flew out to South Korea! It was awesome catching up with our old friends, seeing how our machines are running, and providing on-site support.

A big thanks to our client for the warm hospitality. We remain committed to delivering the best service to our customers in South Korea!

21/08/2026

Forming flat wire springs creates massive stress, making it extremely difficult to precisely control the spring-back angle.

This frequently leads to the following issues:
❌ Inconsistent forming angles from piece to piece.
❌ Unstable spring length (free height varies), or even physical twisting and deformation.
❌ Frequent production line stoppages for re-tuning, which severely cripples efficiency.

Are you struggling with unstable yields and quality in flat wire spring production?

Contact us today to get SIMCO’s precision tooling solutions.
📧[email protected]

18/08/2026

SIMCO YJ Series, our heavy-duty spring coiler designed to handle wire diameters from 5mm to 32mm.

✅ Large-Diameter Processing: Ensure consistent, high-quality production, even with the larger diameter wires.

✅ Superior Precision: Specifically engineered for manufacturing high-quality suspension springs with exceptional accuracy.

✅ Heavy Spring Capability: Especially suited for heavy-duty production, capable of handling wire diameters up to 32mm.

Upgrade your heavy-duty spring manufacturing capabilities with SIMCO.

📮 [email protected]
💡 https://www.simcotw.com/yj-series

SIMCO YJ Series, our heavy-duty spring coiler designed to handle wi...

14/08/2026

Stop production downtime and costly material waste caused by complex setups and manual errors. The SIMCO YJ Series coiler features an advanced control system that lets operators visualize, adjust, and perfect spring designs digitally before production begins.

The features of the Y Series computer control system:


✅ Simple adjust parameters by dragging and dropping.

✅ Able to store the tooling diagrams directly.

✅ Save frequently used spring design settings with one click.

✅ User-friendly 3D graphics for easy operation.

✅ Preview spring designs function to reduce material waste.


To know more more: https://www.simcotw.com/yj-series

11/08/2026

You are likely already aware of SIMCO’s leading position in micro-wire tooling (diameters under 0.03 mm). But did you know that we possess equally strong R&D and customization capabilities in the field of heavy-duty, large-diameter wire tooling?

When processing large-diameter wire, tooling must withstand immense mechanical stress. SIMCO large-scale tools are crafted from premium materials, significantly enhancing the wear resistance of the tool surface to ensure they do not easily chip or break, even under the most severe conditions.

In heavy-duty applications, choosing the right partner is important. Let SIMCO help you achieve your goals of "reducing costs and increasing efficiency."

Contact us now to get your customized solution:

📧 [email protected]

07/08/2026

𝗦𝗜𝗠𝗖𝗢 𝗱𝗼𝗲𝘀𝗻'𝘁 𝗷𝘂𝘀𝘁 𝘀𝗲𝗹𝗹 𝗺𝗮𝗰𝗵𝗶𝗻𝗲𝘀, 𝘄𝗲 𝘀𝗼𝗹𝘃𝗲 𝘆𝗼𝘂𝗿 𝘁𝗼𝘂𝗴𝗵𝗲𝘀𝘁 𝗰𝗵𝗮𝗹𝗹𝗲𝗻𝗴𝗲𝘀

At SIMCO, we offer a complete product line for the spring and forming industries. From high-stability forming machines, durable tooling, and cost-effective wire to essential peripherals, our one-stop supply capabilities are designed to simplify your operations.

With SIMCO as your single source, you minimize communication channels and save crucial time in coordination, letting us handle the complexity while you focus on results.

05/08/2026

The SIMCO YJ Series is specifically engineered as a high-performance heavy-duty coiling solution.
It features a specially designed mechanical architecture and heavy-duty wire-feeding mechanisms to reliably process large-diameter wire with superior stability.

Features:

✅ Jack-type hydraulic core-shaft base: Absorbs shearing impact forces to ensure enhanced manufacturing stability.
✅ Electric-assisted wire feeding: Simplifies wire feeding and makes wire changing much easier.

✅ Multi-pair wire-feed motors: Allow the wire-feeding speed to be flexibly adjusted according to operational requirements.
Looking for the machine capable of reliably producing large-diameter springs? Contact us now. 📞📞

📩 [email protected]
🌎 https://www.simcotw.com/yj-series