Eureka Dry Tech Auto Dry Box / Fast Super Dryer

28/10/2025

～SMD Storage, Eureka FSD – Fast. Reliable. Dry.～
～Ultra-Low Humidity, Ultra-Fast～
https://www.eurekadrytech.com/products/fast-super-dryer

08/09/2022

Updates to Eureka Dry Tech's FD-3D25 Filament Dry Box includes
1. A new digital hygrometer
2. 20 pcs of 608zz roller bearings

The digital hygrometer provides faster response to reflect actual conditions inside the storage compartment.

The 608zz roller bearings allows filament spools to roll smoothly and feed filament from the cabinet with minimal friction.

Details on this product can be found on our website:
https://www.eurekadrytech.com/products/auto-dry-box/eureka-dry-tech-fd-3d25-3d-printing-series-filament-dry-cabinet

Various filament rollers can be found on www.thingiverse.com.
Specific filament model used in the video are:

T**H - The Ultimate Spool Holder by filamentry
https://www.thingiverse.com/thing:2047554

Rolling Filament Stand by hpaulsen
https://www.thingiverse.com/thing:5022602

Music from https://freetousemusic.com
Track: Dreaming by Pufino
https://youtu.be/BT36w_oPNDY

04/10/2021

Comparing PETG Print Results while in and out of ADL-3D77 Humidity Controlled Storage.

This print test was performed on the same Creality Ender 3 printer using the same stl file for every print. The only difference between the prints were the environment where the filament was stored.

The test begins by printing for a week to establish a baseline of "dry" filament when the filament was stored in Eureka Dry Tech's ADL-3D77 humidity controlled filament dry cabinet for 2 months.

The same model was then exposed to humidity and printed for 2 weeks while stored in room conditions. By day 2, the PETG filament began to show stringing defects and progressed worse as each day passes.

The filament was placed back in Eureka Dry Tech's ADL-3D77 and printed for 2 weeks. By day 5, the stringing defects has significantly reduced to pre-exposure to humidity quality.

For full time lapse and photos of this test, please visit:
https://www.eurekadrytech.com/application/3d-printing-filament-storage-dry-cabinet/petg-nylon-abs-test-print-results

Music credit:
Artist: tubebackr
Track: RISE

Comparing PETG Print Results while in and out of ADL-3D77 Humidity Controlled Storage.This print test was performed on the same Creality Ender 3 printer usin...

30/08/2021

Eureka Dry Tech ADL-3D122N 3D Printing Filament Storage Dry Box

Capacity: 125 Liters
Humidity Range: ≤10% RH ±5%RH
External Dimensions: 40*84*44.5 cm (W*H*D)
Internal Dimensions: 32*74*32.5 cm (W*H*D)

4 filament feed ports for direct printing while filament is in storage.
This product can store over 25 rolls of 20 cm diameter filament spools.

For product detail specs please visit:
https://www.eurekadrytech.com/products/auto-dry-box/eureka-dry-tech-adl-3d122n-3d-printing-series-filament-dry-cabinet

Music Credit: Ambient Piano Trap by Alex-Productions

Eureka Dry Tech ADL-3D122N 3D Printing Filament Storage Dry BoxCapacity: 125 LitersHumidity Range: ≤10% RH ±5%RHExternal Dimensions: 40*84*44.5 cm (W*H*D)In...

27/08/2021

Eureka Dry Tech ADL-3D80P 3D Printing Filament Storage Dry Box

Capacity: 81 Liters
Humidity Range: ≤10% RH ±5%RH
External Dimensions: 54*47*41 cm (W*H*D)
Internal Dimensions: 50*37.4*35.6 cm (W*H*D)

4 filament feed ports for direct printing while filament is in storage.
This product can store over 16 rolls of 20 cm diameter filament spools.

For product detail specs please visit:
https://www.eurekadrytech.com/products/auto-dry-box/eureka-dry-tech-aw-3d80p-3d-printing-series-filament-dry-cabinet
Music By Vendredi - When Winter Rises

Eureka Dry Tech ADL-3D80P 3D Printing Filament Storage Dry BoxCapacity: 81 Liters Humidity Range: ≤10% RH ±5%RHExternal Dimensions: 54*47*41 cm (W*H*D)Intern...

27/08/2021

Eureka Dry Tech ADL-3D77 3D Printing Filament Storage Dry Box.

Capacity: 79 Liters
Humidity Range: ≤10% RH ±5%RH
External Dimensions: 40*55.5*44.5 cm (W*H*D)
Internal Dimensions: 32*46*32.5 cm (W*H*D)

4 filament feed ports for direct printing while filament is in storage.
This product can store over 16 rolls of 20 cm diameter filament spools.

For product detail specs please visit:
https://www.eurekadrytech.com/products/auto-dry-box/eureka-dry-tech-adl-3d77-3d-printing-series-filament-dry-cabinet

Music By Scandinavianz - Pilgrims

Eureka Dry Tech ADL-3D77 3D Printing Filament Storage Dry Box.Capacity: 79 Liters Humidity Range: ≤10% RH ±5%RHExternal Dimensions: 40*55.5*44.5 cm (W*H*D)In...

25/07/2021

Introducing
Eureka Dry Tech FD-3D25
3D Printing Filament Storage Dry Box.

Capacity: 24 Liters
Humidity Range: ≤15% RH ±5%RH
External Dimensions: 38*26*26 cm (W*H*D)
Internal Dimensions: 34*24*22 cm (W*H*D)
4 filament feed ports for direct printing while filament is in storage.

This product can fit up to 5 rolls of 20 cm diameter filament spools.
However, for use with direct printing we recommend limiting to 4 spools to allow room for filament rollers to be installed.

For product detail specs please visit: https://www.eurekadrytech.com/products/auto-dry-box/eureka-dry-tech-fd-3d25

Introducing Eureka Drytech FD-3D25 3D Printing Filament Storage Dry Box.Capacity: 24 Liters Humidity Range: ≤15% RH ±5%RHExternal Dimensions: 38*26*26 cm (W*...

02/06/2021

Eureka Dry Tech Ultra Low Humidity Fast Super Dryer
Customer Application Story-
Bestyield International
Byte International

IPC/JEDEC J-Std-033
For product information please visit:
https://www.eurekadrytech.com/products/fast-super-dryer

Eureka Dry Tech Customer Application Story-Bestyield InternationalByte InternationalEureka Dry Tech Ultra Low Humidity Fast Super Dryer ProductIPC/JEDEC J-St...

14/05/2021

PTFE tubing installation instructions for our customers that uses the Eureka Dry Tech 3D Printing Filament Storage Dry Cabinet line of products.

We strongly advise usage of PTFE tubing for smooth feeding of filaments to your printer.

For more details about our 3D Printing Filament Storage Dry Cabinet line of products please visit our website
https://www.eurekadrytech.com/

These are the PTFE installation instructions for our customers that uses the Eureka Dry Tech 3D Printing Filament Storage Dry Cabinet line of products. We st...

11/05/2021

PETG Print Test Comparing Storage in Eureka Dry Tech ADL-3D77 Humidity Controlled Filament Storage Cabinet 10% RH Environment vs 55% RH Ambient Room Condition.

This video demonstrate the importance of storing and maintaining filament in humidity controlled environments. PETG is a material that will rapidly absorbs moisture when stored improperly.

All filament polymer will suffer from moisture contamination to some extent.
By storing your filament in our dry box products it will help eliminate one of the many common failures during the printing process.
When filaments are maintained in a dry state print quality will also be increased.

Eureka Dry Tech's 3D Printing Filament Storage Dry Boxes provides easy and convenient storage without any maintenance required.
Simply store it in Eureka Dry Tech's Auto Dry Box products upon opening of filament packaging and our dry box will maintain the filament in a optimal storage condition.

All our Filament Dry Boxes includes 4 filament feed ports for direct printing while in storage.
Currently 4 model sizes are available for purchase thru our global distributor channels.

For more details please visit our website https://www.eurekadrytech.com

PETG Print Test Comparing Storage in Eureka Dry Tech ADL-3D77 Humidity Controlled Filament Storage Cabinet 10% RH Environment vs 55% RH Ambient Room Conditio...

02/11/2020

Last chance for 30% off discount for selected products at the 2020台北國際攝影器材暨影像展 Taipei International Photography & Mediat Equipment Exhibition.
If you are in the area, stop by and visit our booth P222 for special promotions and discounts offered at this event.

30/10/2020

We are all setup at the 2020台北國際攝影器材暨影像展 Taipei International Photography & Mediat Equipment Exhibition
If you are in the area, stop by and visit our booth P222 from October 30, 2020 to November 2, 2020 for special promotions and discount we will be offering at this event.