All repair quotes are FREE however there is a $30 fee to diagnose an electrical problem. Prices shown are for labor and do not include the cost of strings/parts. If the service you need is not shown, please inquire. RESTRINGS
Steel String Guitar/Bass: $15
12 String Guitar: $25
Locking Tremolo Guitar: $25
Classical Guitar: $25
SETUPS
Electric/Acoustic Guitar or Bass: $80 and up
- Requires neck rem
oval for truss rod adjustment or shimming: +$10
- Non-locking tremolo bridge: +$10
- Locking tremolo bridge: +$20
- 12 String guitar: +$25
INCLUDES: restring, tighten and lubricate all hardware, clean and test electronics, replace battery if needed (Battery not included), adjust or rehang loose wiring, clean and condition fingerboard, fret polish to remove minor scratches/pits and corrosion, cleaning of entire guitar, adjust truss rod to correct neck relief, adjust saddle radius to match fingerboard, adjust action at bridge, file nut slots for proper string movement, adjust intonation, adjust tremolo bridge setting to player’s preference, adjust pickup balance, full inspection and play test. FRETWORK
Fret Edge Dress: $40
Fret Level: $120 + Setup
Partial Fret Level: $10 per fret + Setup
NUT REPLACEMENT (Pre-made)
Guitar/Bass: $40 + Setup
12 String Guitar: $55 + Setup
ELECTRIC GUITAR BRIDGE & SADDLE REPLACEMENT
Saddles (guitar or bass): $5 + Setup [prorated per string]
Most Hardtail Bridges: $30 + Setup
Telecaster Bridge: $40 + Setup
Tremolo Bridge: $35 + Setup
Locking Tremolo Bridge: $45 + Setup
ACOUSTIC GUITAR SADDLE REPLACEMENT
Premade Saddle: $20 + Setup
ELECTRONIC COMPONENT REPLACEMENT
All electronic component replacements are subject to the base price of $20 plus the charge for the specific component. The base price is one-time-only; if multiple components are being replaced, the base price is only charged once. Archtop guitars without easy access to the control
cavity must have the entire control harness removed through the f-hole, these situations are subject to an extra charge of $40. Base Price: $20
*Archtop guitar Without Electronics Access: + $40
*Requires New Mounting Hole: + $15
Output Jack: + $15
Control Pot: + $15
Pickup Selector Switch (Gibson Style): + $20
Pickup Selector Switch (Fender Style): + $30
Super Switch/Freeway Switch: + $50
Mini-switch: + $20
Push-pull Pot: + $35
Kill Switch: + $10
9v battery clip: + $10
Battery Box (Direct replacement): + $15
PICKUP INSTALLATION (Electric Guitar & Bass)
Prices are for direct replacement pickups and do not include routing or modification of the body. PASSIVE
One Pickup: $50
Two Pickups: $80
Three Pickups: $110
Archtop Guitar (without electronics access panel): + $35
4-conductor Pickup w/ Switching (mini-switch or push/pull pot): + $15
ACTIVE (EMG)
Switching from passive to active pickups requires installation of control pots, output jack and battery. If no battery is provided, a battery will be added to the bill. Prices do not include routing or modification of the body. Newer pickups feature a solderless quick connect system, this can be bypassed for a traditional soldered connection (+ $50) if desired. Telecaster Style (2 pickups, 2 pots, one jack, one battery): $80
Stratocaster Style (3 pickup, three pots, one jack, one battery): $100
Les Paul Style (Two pickups, four pots, one jack, one battery) $100
PICKUP INSTALLATION (Acoustic)
Soundhole Pickup w/ Endpin Jack $50
PICKGUARDS
Prices are for pre-made pickguards not requiring modification or drilling. Install Stratocaster Style Pickguard: $40
Install Floating Pickguard (Les Paul, archtop, etc,): $10
*Requires drilling of new mounting screw holes: + $10
Install New Self-stick Acoustic Pickguard: $30
TUNERS
*Single Tuner Replacement - Includes replacement of single string
(string not included). Prices are for direct replacement and do not include reaming or shimming. Geared Tuner Replacement: $10
Classical Tuner Replacement: $15
FULL TUNER REPLACEMENT
Classical Guitar: $15 + restring or setup
Guitar/Bass (Steel string): $25+ restring or setup
12-String guitar (Steel string): $40+ restring or setup
*Requires filling of old set-screw holes: + $15
*Requires drilling of new set-screw holes: + $15
*Requires new guide pin hole (Sperzel or Schaller style): + $20
