Go Fab CNC

05/12/2026

Ran some more Laser Tests on some Gasket Material an Onwer sent us. Did great!

We took this video at the Robert’s Company using the 40 Watt Laser on Go Fab CNC Legacy Table.A Table Owner interested in the capabilities of the Laser sent ...

04/23/2026

Got to do some Test Cuts on Industrial Gasket Material using the Laser and was totally impressed!

Here’s the Material Breakdown using the 40W Laser (there’s also a 60W Laser that would probably Cut the Number of Passes in half).

Here are the Numbers:
- Black Rubber 1/8”: 300mm - 2 Passes
- Garlock Gylon 3500 1/8”: 300mm - 3 Passes
- Garlock Gylon 3510 1/8”: 300mm - 5 Passes
- Garlock Blue Guard 1/8”: 300mm - 9 Passes
- White Material 1/8”: 150mm - 22 Passes

Those lengths are the Feedrate, so 300mm = 300mm per minute Cut Speed. Number of Passes is how many times it had to Trace around the Cut to fully Cut through. So Black Rubber 1/8” had a Cut Speed of 300mm per minute and needed 2 Passes to fully Cut through and drop out.

If you go with the 60W Laser you will be able to either Cut Faster or make less passes.

For Calculating Total Cut Time, get the Length of all the Cuts on a Gasket in MM. Then divide that by the Cut Speed and multiply it times the number of Passes.

01/12/2026

Another cool Cut from The Roberts Company using the Laser attachment on their Go Fab CNC Plasma Table. He also shared the Link for the website that will let you create Puzzle Pieces out of any design.

https://draradech.github.io/jigsaw/jigsaw.html

09/16/2025

New Z Axis available. It uses our new “Quad Lock Alignment System” or QLAS 😉. All CNC Machined. Perfect Alignment. Very Rigid. Zero Play.

06/30/2025

We were incredibly lucky to get the opportunity to tackle this project! One of our existing Customers that already has a 4'x8' Go Fab CNC MEGA Table asked if we could make a Custom Table for Cutting 10'x40' Sheets of 2.5" thick GR60 Steel that weighs 42,000 lbs! We said YES!

Introducing the Go Fab CNC GIGA Table!

Go Fab CNC has an incredible Team that's ready to take on anything. Please let us know if there's anything we can do for you.

Call us at: 512-270-1047
Visit our Website at: www.gofabcnc.com

https://youtu.be/tQgUCxLXuog?si=t-gykovtwDfeyWj0

We were incredibly lucky to get the opportunity to tackle this project! One of our existing Customers that already has a 4'x8' Go Fab CNC MEGA Table asked if...

05/14/2025

Fitting the Bed Frame in the Water Pan before Painting.

The Water Pan, Bed Frame and Cutting Slats are over 10,000 lbs! 💪

10’x40’ GIGA Table is set to leave next week!