TiNives Original

12/01/2025

Working on a side quest for the start of the month!

Chef knife in CPM154, it'll have stainless bolsters with wood and resin handles.

Now we just need to figure out what to engrave on the bolsters 🤔

09/19/2025

Diamonds going in some thumb studs!

08/21/2025

Here's a pro tip for other makers. Change out your blasting media!

It seems like a no brainer but we've had the same glass bead media in the blaster for about a year and a half, it broke down so much that it was leaving a dark patchy finish. It's a little hard to see in the photo but the top was with the old media and the bottom is the new. The new media left a brighter more even finish. Now we're making it a rule to change the media out every six months at least.
🇺🇸

08/04/2025

Here's one of three photos that we had taken by the one and only Sharp By Coop Photography

This is the satin handle inlay version of our new 3.65 Ultralite Flipper model. It features a carbon fiber inlay and backspacer, MagnaCut blade, and titanium everything else.

These are available to order on our website as well as a few other versions of this same design. Go check it out through the link in our bio!

07/22/2025

This 3.65 Ultralite with green anodized hardware is without a doubt my favorite variation from Friday's drop. There are three of these available! Along with a few other colors. Go check them out!
🇺🇸

07/18/2025

🇺🇸 AVAILABLE 🇺🇸 The first drop for the new flipper design is live! We have 3 of the blue, green, and purple available and one of the gold available.

This model features bead blasted titanium handles, a MagnaCut blade with a tumbled finish, and anodized hardware and clips!

It also features a 3.65in blade and milled pockets inside the handles. So we're deciding to call this the 3.65 Ultralite.

These are priced at 425 with free standard shipping and you can find more details and grab one for yourself through the link to our website in our bio!
🇺🇸

07/15/2025

Working through the first 10 of these new flippers! These should be ready for our first drop this Friday at 4pm EST.

3.65in MagnaCut blade with titanium handles and anodized titanium hardware and clip(to be added).

First come first served!.
🇺🇸

06/12/2025

We are looking for a few dealers to carry our knives! If you have a website and are interested shoot me an email at [email protected]

Send a message to learn more

05/20/2025

The new website is up as of today!

TiNives was born from a passion for precision and a drive to innovate, introducing designs that revolutionized the knife-making industry. Guided by founder Scott Self's vision, we have continued to push the boundaries of craftsmanship and design. Today, TiNives carries forward its proud heritage, bl...

12/17/2024

Moving from the patriot engraved 3.65s to the bolstered tactical 3.65s this week!

11/15/2024

Getting it done this Friday! We're milling down a fixture plate on our new router so we can cut composite handle parts. Carbon fiber and other composites tear up the moving parts in the mill so we decided to get a different machine to handle those parts.
🇺🇸

10/29/2024

🇺🇸🦅
🇺🇸