Champion Bolt & Supply

Champion Bolt & Supply Our specialities are ASTM structural bolts, anchors, threaded rods, clevises, electrical and pipe fittings, cutting tools, and custom items to print.

Come check is out at the Alington street fair! We're here all weekend. We're across from Blue Bird Cafe.
07/11/2025

Come check is out at the Alington street fair! We're here all weekend. We're across from Blue Bird Cafe.

🔩 **Technical Tip: Calculating the Correct Drill Size for Tapping** 🛠️🔩Attention Industrial Professionals! When it comes...
09/24/2024

🔩 **Technical Tip: Calculating the Correct Drill Size for Tapping** 🛠️🔩

Attention Industrial Professionals! When it comes to tapping threads, selecting the correct drill size is essential for ensuring optimal thread engagement and integrity. Here’s a concise guide to assist with your tapping operations:

1. **Identify Tap Specifications**: First, confirm both the size and thread pitch of your tap. For example, a complete specification like M6-1 or M8-1.25 specifies not only the diameter in millimeters but also the pitch, which is vital for compatibility. Remember that both metric and imperial threads can have varying pitches, and this must be taken into consideration during setup.

2. **Utilize Tapping Charts**: Refer to comprehensive tapping charts that correlate specific tap sizes with their corresponding drill bit diameters. For instance:
- A 1/4”-20 tap typically requires a #7 drill bit.
- An M8-1.25 tap generally necessitates a 6.8mm drill bit.

3. **Handling Odd Sizes**: It’s important to note that some specialized or non-standard tap sizes may not appear in standard tap charts. In these cases, calculating the drill size using the formulas below can be incredibly helpful, allowing you to determine the necessary diameter for effective threading.

4. **Calculating Drill Sizes**:
- **Imperial**: For imperial sizes, determine the required drill size by subtracting the reciprocal of the thread pitch from the diameter. For example, for a 1/4”-20 tap: 0.25” - (1/20) = 0.25” - 0.05” = 0.20”.
- **Metric**: For metric sizes, the calculation is similar; subtract the thread pitch from the diameter. For instance, for an M8-1.25 tap: 8mm - 1.25mm = 6.75mm.

5. **Select the Closest Drill Size**: After performing your calculations, locate the closest available drill size. If you can’t find an exact match, it’s generally advisable to go slightly up in size rather than down. Going smaller can increase the risk of tap breakage and compromise the integrity of the threads.

6. **Conduct a Test Drill**: When precision is paramount, drilling a test hole beforehand is recommended to confirm compatibility and avoid potential threading issues.

For all your tapping needs—standard and non-standard—Champion Bolt is your go-to resource. We offer an extensive selection of taps, dies, and drill bits, along with the expertise to assist you in determining the correct drill size for any application.

👉 Don't settle for anything less than the best – **purchase your taps and drill bits from Champion Bolt today and ensure your operations run smoothly and efficiently!** 🛠️✨

🔧 Understanding Galling in Stainless Fasteners and How to Prevent It! 🔧Have you ever encountered issues with stainless f...
09/20/2024

🔧 Understanding Galling in Stainless Fasteners and How to Prevent It! 🔧

Have you ever encountered issues with stainless fasteners galling? It's a frustrating problem, especially prevalent in applications using nylon insert locknuts and finer threads. But why does galling happen in the first place?

Galling occurs when the surfaces of metal fasteners slip against each other, causing one surface to partially tear away. This is often exacerbated by the presence of oxide layers on stainless steel, which can lead to a higher risk of the materials binding together. The microscopic imperfections and roughness of the metal can create points of contact that, under high pressure or torque, can result in these surfaces "welding" themselves together.

When using finer threads, the risk of galling increases due to the higher surface area contact. Additionally, nylon insert locknuts can create extra friction during installation, contributing to the potential for galling.

So how can you effectively reduce the risk of galling? One of the best solutions is to use a lubricant like Anti-Seize. This lubricant forms a protective barrier between the metal surfaces, significantly lowering friction and preventing the fasteners from binding.

Champion Bolt carries a variety of Anti-Seize options to suit different needs. We offer an all-purpose Anti-Seize suitable for standard applications, as well as a Copper grade ideal for high-heat environments. You can find our Anti-Seize available in convenient 1/2 pound and 1 pound brush top containers, as well as in aerosol and push stick formats for easy application.

By taking these precautions and using quality lubricants, you can ensure your fasteners perform reliably and remain easy to install and remove, avoiding the hassles of galling.

Stay informed and keep your projects hassle-free! 🛠️✨

09/18/2024

🌟 Exciting News from Champion Bolt! 🌟

Hey everyone! We’re thrilled to announce that Champion Bolt is now stocking Krylon spray paint, including the industrial-grade Tough Coat and our favorite DIY NOW paint! 🎨✨

Whether you’re tackling a big project or just adding a pop of color to your home, we’ve got you covered with a wide variety of colors and finishes. Tough Coat is perfect for those heavy-duty jobs, while NOW is ideal for all your craft and home improvement needs.

🌈 Stop by our store and pick up your favorite spray paint today! Let your creativity flow with Krylon!

Thank you for choosing Champion Bolt. We can’t wait to see the amazing projects you create!

🌟 Check out this impressive 4" 8 pitch slotted nut, held proudly by our very own Jadon! This massive nut is made to the ...
09/18/2024

🌟 Check out this impressive 4" 8 pitch slotted nut, held proudly by our very own Jadon! This massive nut is made to the ASTM A194 Grade 2H specification, which is known for its high strength and durability in various demanding applications. The A194 specification ensures that fasteners like this nut can withstand heavy loads, extreme temperatures, and resistance to corrosion, making it ideal for critical industrial environments.

At Champion Bolt, we thrive on meeting the toughest fastener challenges, providing high-quality products like this that you won’t find anywhere else. Whether you’re in need of hard-to-find items, specialty fasteners, or just top-notch service, Champion Bolt is your go-to source. Trust us to deliver the perfect solution for your next big project! 🛠️💪

09/17/2024

🔩🔧 Struggling with Fasteners? Let Us Help You! 🔧🔩

Identifying the right fasteners can be a daunting task for many, whether you’re a DIY enthusiast or a seasoned professional. With so many types, materials, and sizes available, it’s easy to get overwhelmed. Using the wrong fasteners can lead to project delays, costly mistakes, and frustration.

That’s where we come in! At Champion Bolt & Supply, we pride ourselves on our expertise in fasteners. Our team of professionals is here to help you find the exact products you need quickly and efficiently, saving you both time and money.

Don’t let fastener confusion slow down your project—reach out to Champion Bolt & Supply today, and let us provide you with the solutions you need to keep your work on track!

09/13/2024

🔩✨ **Understanding the Importance of Washer Faces on SAE J429 Hex Cap Screws** ✨🔩

Hey everyone! Today, let’s dive into an often-overlooked detail in fastening technology: the use of washer faces on SAE J429 hex cap screws and how they differ from regular hex bolts.

When it comes to securing materials in our projects, using the right hardware is crucial for reliability and safety. SAE J429 hex cap screws are designed for high-stress applications, and one key feature that sets them apart is the washer face that is incorporated into their design.

💡 **What's the Difference?**

While both hex cap screws and hex bolts play essential roles in fastening, the fundamental difference lies in the incorporation of the washer face in SAE J429 hex cap screws.

1. **Integrated Washer Face**: The washer face on a hex cap screw is built into the head, providing a smooth surface area for load distribution right where it’s needed. This feature enhances the fastening capability, making it ideal for demanding applications. It also allows for turning of the head for installation with consistent surface contact.

2. **Load Distribution**: This built-in washer face helps distribute the load more evenly across the surface, reducing the risk of material deformation and ensuring a tighter grip.

3. **Vibration Resistance**: The washer face also helps maintain clamping force, which is especially important in environments prone to vibrations that can loosen fasteners over time.

4. **Surface Protection**: For softer or plated materials, having the washer face acts as a barrier, protecting both the fastener and the workpiece from damage and corrosion.

5. **Alignment Aid**: This feature aids in aligning components properly, ensuring a better fit and more effective joint.

# # # **Grades Available in SAE J429:**

SAE J429 hex cap screws come in several grades, each designed to meet different strength requirements:

- **Grade 2**: The most common grade, used for moderate load applications.
- **Grade 5**: Provides higher strength, suitable for heavy-duty applications.
- **Grade 8**: The strongest option, designed for extreme stress and high-performance environments.

Incorporating washer faces into your assembly might seem like a minor detail, but it can make a significant difference in the durability and strength of your connections. 🛠️🔧

And speaking of connections, why did the cap screw break up with the bolt? Because it found someone who really "held it together!" 😂

Let’s keep building stronger structures together! If you have any questions or tips about fastening techniques, drop them in the comments below! 👇😄

09/12/2024

Are you tired of the inefficiencies and headaches that come with manually checking inventory? Here’s why a Champion Vendor Managed Inventory (VMI) program is a game changer for your business:

1️⃣ Increased Efficiency: Our VMI program streamlines the inventory management process. By letting Champion Bolt monitor stock levels and manage replenishment, you free up valuable time for your employees to focus on more strategic tasks.

2️⃣ Reduced Stockouts and Overstocks: With VMI, we are responsible for keeping track of inventory levels, ensuring that you have just the right amount of stock on hand. This reduces the risk of stockouts that can disrupt operations and prevents the excess inventory that ties up cash flow.

3️⃣ Enhanced Collaboration: VMI fosters a closer partnership between you and us as your supplier. This collaboration leads to better communication, forecasting, and planning, ultimately resulting in a smoother supply chain.

4️⃣ Cost Savings: By optimizing inventory levels, VMI can help reduce storage costs and minimize waste. Plus, with fewer resources spent on manual inventory checks, you can achieve more with less!

5️⃣ Data-Driven Insights: Our VMI program can be custom tailored with advanced analytics that provide valuable insights into purchasing trends and inventory movements, empowering you to make informed decisions.

In today's fast-paced business environment, making the switch to our VMI program can give you the competitive edge you need. Let technology and partnership simplify your inventory management!

Clevis pins are a great option for securing parts that may need to be quickly changed or long term light duty use. Ofte...
02/27/2024

Clevis pins are a great option for securing parts that may need to be quickly changed or long term light duty use. Often seen in the agricultural or automotive industries. They commonly come in steel or stainless.

https://championbolt.com/shop/catalog/pins/clevis+pins

A few of the many families of Chrome items we now stock! Metric and imperial sizes!
02/16/2024

A few of the many families of Chrome items we now stock! Metric and imperial sizes!

Fender washers refer to washers with a large outside diameter in relation to their inside diameter. They are useful for...
02/15/2024

Fender washers refer to washers with a large outside diameter in relation to their inside diameter. They are useful for distributing loads over a larger surface area or allowing a smaller fastener to not pass through an oversized hole.

We stock them in imperial and metric sizes. They come in steel and stainless and both thick and thin. Check out our fender washers below.

https://championbolt.com/shop/catalog/washers/flat+washers =1cbc0010-c836-474b-adf1-ec6e0892df21

Lock nuts come in all shapes and sizes. Here is a thin nylon insert lock nut. These are often called Nylok Jam Nuts or...
02/13/2024

Lock nuts come in all shapes and sizes. Here is a thin nylon insert lock nut. These are often called Nylok Jam Nuts or NTE lock nuts. They come in mild steel or hardened grade for use with grade 8 bolts. Follow the link below to see our selection.

https://championbolt.com/shop/catalog/lock+nuts/nylon+insert+lock+nuts =7a06e59a-d7ae-4007-9876-56d873334208

Address

2417 Broadway
Everett, WA
98201

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Telephone

+14253392632

Website

Alerts

Be the first to know and let us send you an email when Champion Bolt & Supply posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Champion Bolt & Supply:

Shortcuts

Share