Drill Masters Eldorado Tool, Inc

10/10/2022

01/22/2018

January 23-26, 2018,Come meet us and see what Drill Masters Eldorado Tool, Inc is all about!

Shot Show
Sands Expo Center
Palazzo Ballroom, 5th floor

11/10/2017

11/07/2017

Solid Carbide drills are manufactured as a single piece of carbide. The tip and tube is a single piece product which eliminates the braze joint at the head and tube transition. Thus resulting in an extremely strong, ridged tool. Most small diameter drills significantly benefit from solid carbide drills because they yield the maximum allowable surface footage and feed rates without the whip factor due to their rigidity. Solid carbide drills are manufactured using a new process so excessive lead times are avoided.

The advantage of eliminating the braze joint at the tip and tube transition results in a more rigid tool allowing a faster surface footage and feed rates on small diameter drills.

Delivery within 24 hours on catalog diameters from 0.039 (1.0mm) to 0.4375″ (11.1mm) in lengths to 12.00″(304.8mm), special orders to almost any length or diameter within 4 weeks.

10/23/2017

DMET INDEXABLE GUN DRILL
DIAMETERS FROM .625” (15.875MM) TO 1.25” (31.75MM)
(ONLY 5 INSERT SIZES NEEDED TO COVER THE RANGE)

The triangular inserts have 3 cutting edges. The positive rake chip breakers and chip splitting geometries allow the use of feed rates 3 to 4 times that of traditional gun drills.

They are manufactured from micrograin carbide and available in several PVD wear resistant coatings.

10/19/2017

CNC grinding gun drill tips

10/18/2017

Thank you to all our Sponsors for supporting Pumpkin Delight School on our Panther Prowl!

06/22/2017

06/13/2017

STOCK GUNDRILLS
We stock over 800 sizes and lengths in number, letter, metric, and fraction sizes, all available for same day delivery. Our 24 hour deliveries accommodate your inventory needs.

We offer diameters from .0393″ (1.0 mm) to 1.5″ (38.1mm) in lengths from 5.0″ (127mm) to 72.0″ (1828.8mm) servicing virtually every industry, with special emphasis on the mold industry’s requirements for varied lengths and diameters.

http://dmetool.com/wp-includes/images/pdf/Drill%20Masters%20Price%20List-Book%202016.pdf

06/13/2017

PULL BORE REAMER


This carbide Multi-flute Reamer of usually 4 or 6 Flutes is pulled or pushed through a gun drilled barrel to accurately control the surface finish and size of the ID of the barrel prior to rifling. Standard procedure is to remove .003″ – .004″ per size of material to insure a precision clean bore which sets up the style of rifling tool to be used. Coolant flows through the ID of the rod over the fluted reamer to move the chips forward creating an excellent bore inside the barrel.