NO, Plow-Slick is NOT a silicone spray, graphite spray, Teflon® spray or plow wax but an advanced, 2-part, non-stick, slippery, polymer coating that cures on your snowplow. It will provide an unbelievably slick non-stick finish that will last an entire snowplowing season. NO, not even remotely close. Plow-Slick is the ONLY one-time per season, non-stick, engineered snowplow coating on the market t
oday! In fact, Plow-Slick is so slick and slippery, it will put any other snowplow paint or coating to shame! Why is Plow-Slick so slippery? Plow-Slick is extremely non-stick, slick and slippery because it chemically bonds
to your snowplow and produces the hardest, slickest surface available. The finish
is completely resistant to salt, snow, ice and grime and keeps your expensive
plow working BETTER than new. Do you have to keep applying Plow-Slick? NO, because Plow-Slick is an ultra-slick, industrial snowplow coating, only 1 application
per plowing season is needed for incredible, non-stick performance! How long does it take to apply Plow-Slick? Plow-Slick only takes about 30 minutes to apply on a clean plow and then it needs to dry for 48 hours. After that, your plow will have a diamond-hard slippery finish that NO plow wax, silicon spray or Teflon® spray can provide. Can Plow-Slick be applied in cool temperatures? once mixed, Plow-Slick will dry at temperatures in the upper 30's and still give
you the ultra-slick and slippery finish that you and your snowplow will love. This makes using Plow-Slick a very easy application that can be done in any garage. How is Plow-Slick applied? Plow-Slick can be brushed, rolled or sprayed on your plow, dump box or truck bed. We mostly recommend using a non-shed 1/4" nap roller, and brush, to apply the super-slick coating. Do I need to spray any lubricants on the Plow-Slick coating? NO, actually snowplow lubricants can attract dirt and should NOT be used on the super-slick, non-stick Plow-Slick coating. Can Plow-Slick be applied to my shovels? Absolutely, why not make a hard job much easier? Plow-Slick is so slippery and non-stick that you will want to use it on every shovel you own. In fact, a 1-plow kit of Plow-Slick contains enough coating to cover a few shovels as well as your plow! Can I use Plow-Slick in my dump box? YES, Plow-Slick will repel snow, ice and salt build-up. from your dump box and makes the metal completely resistant to the corrosive damage caused from salt. Plow-Slick has also been tested against corrosion from salt spray for over 5500 continuous hours with no signs of corrosion! Is Plow-Slick available in different colors? Plow-Slick is available in Safety-Red, Safety-Yellow and Clear. Again, Plow-Slick is NOT a wax, silicone or Teflon® spray but a new state-of-the-art,
2-part polymer snowplow coating that will outperform ANY other snowplow
ice and snow repellent on the market today!
