KickingHorse USA - Welding Inverter for Home

KickingHorse USA - Welding Inverter for Home For past 18 years, KickingHorse® is dedicated to develop welding & plasma cutting inverters for home.

🔬 When a nickel superalloy meets an electron beam, small process choices decide whether a hot-section joint survives — o...
09/09/2026

🔬 When a nickel superalloy meets an electron beam, small process choices decide whether a hot-section joint survives — or cracks.

New research in Materials Characterization breaks down exactly how beam current and scanning speed shape the weld in Allvac 718Plus, the precipitation-hardened nickel superalloy trusted in aero-engine and gas-turbine parts operating up to 704°C.

Key findings:
⚡ Too much beam current deepens the weld pool and strengthens directional solidification — that is what drives centerline solidification cracks and porosity, not simply "too much heat."
🔍 EBSD and EPMA mapping link each setting to dendrite growth, niobium segregation and Laves-phase formation.
🛡️ Liquefied grain boundaries appeared in the heat-affected zone — yet no HAZ cracking occurred, showing Allvac 718Plus welds better than expected.
🎯 The payoff: clearer electron-beam welding process windows for high-temperature load-bearing components.

Aircraft engines and gas turbines depend on joints like these. Reliability is won in the process map.

💡 Great welding starts with understanding the science.

🔬 Shaping the future of welding with modelling & simulationTop researchers and industry experts are gathering in Cambrid...
09/08/2026

🔬 Shaping the future of welding with modelling & simulation

Top researchers and industry experts are gathering in Cambridge, UK on 30 September 2026 for a one-day seminar exploring the latest advances in welding simulation — and it's shaping up to be a game-changer for the industry.

What's on the agenda:
⚡ Weld pool modelling & computational metallurgy
🔩 Predicting residual stresses & distortion in welded steel
🛠️ Linking micro-scale physics to full assemblies
🤖 New AI-driven & Bayesian optimisation methods
📏 Benchmarking, validation & standardisation best practice

Why it matters: simulation is helping fabricators and engineers weld safer, faster and more sustainably — cutting trial-and-error, reducing distortion and unlocking new materials and processes.

Presentations come from TWI, Cranfield, Oxford, Manchester, WMG, Rolls-Royce, Jaguar Land Rover, Boeing, Equinor and more, closing with a panel on what's next for welding R&D.

Great for welding engineers, simulation specialists, materials scientists and anyone in advanced manufacturing who wants to stay ahead.

🔧 Handheld laser welding just got a big upgrade!Chinese manufacturer Huanri has unveiled its new K series, introducing "...
09/08/2026

🔧 Handheld laser welding just got a big upgrade!

Chinese manufacturer Huanri has unveiled its new K series, introducing "laser swing welding technology" to the handheld laser welding market — a breakthrough that tackles one of the process's biggest limitations.

Why it matters:
• 🎯 Breaks past the old straight-and-narrow limit — now handles non-standard, special-shaped, and wide welds with ease
• ✨ New K1 welding gun is half the length of current guns and weighs just ~290g
• 💪 Welders can swing it naturally, like a TIG or MIG torch — far less fatigue on long jobs
• 🛠️ Opens up handheld laser welding to far more applications and fabricators

Laser welding is already known for speed, low heat input and clean results. Making the gun light and maneuverable means shops can finally use it the way they use a traditional torch — on real, everyday jobs.

The move signals how quickly handheld laser technology is maturing for small shops and large fabricators alike.

Are you using handheld laser welding in your shop yet? Drop a comment below! 👇

🛡️ Major EU rule change coming for welders — and it's all about your health.The European Union has agreed on a sixth rev...
09/07/2026

🛡️ Major EU rule change coming for welders — and it's all about your health.

The European Union has agreed on a sixth revision of its directive covering carcinogens, mutagens and reprotoxic substances — and for the first time, welding fumes are formally brought into its scope.

What this means for the industry:

🔧 Tighter exposure limits — occupational exposure limits for welding fume are being strengthened to better protect workers who weld day in, day out.

🗓️ A six-year transition — industry gets time to adapt, so shops can plan upgrades to ventilation, extraction and work practices without scrambling.

🌬️ More focus on fume control — expect source extraction, LEV and air monitoring to become even more central to everyday welding operations.

⚖️ A clear compliance roadmap — employers and fabricators across Europe will need to review risk assessments and update their fume management plans.

If you run a fab shop or weld professionally, now is the time to audit your fume extraction setup and make sure respiratory protection programs measure up. Clean air at the arc isn't just good practice — it's becoming the legal standard.

What's your shop doing to control welding fume?…

🔬 Pressure-chamber MIG welding: a smarter way to weld high-strength stainless?Nitrogen-strengthened austenitic stainless...
09/07/2026

🔬 Pressure-chamber MIG welding: a smarter way to weld high-strength stainless?

Nitrogen-strengthened austenitic stainless steel is prized for marine, cryogenic and pressure applications. But welding it has one big headache: nitrogen escapes the weld pool, dragging down strength and leaving porosity.

Researchers led by Suzhou University just tested a clever fix — MIG welding inside a pressurized chamber (100–180 kPa) — with striking results:

🔹 Weld nitrogen content up from 0.54% to 0.60%
🔹 Porosity collapsed: pores fell from 22 to just 3
🔹 Yield strength climbed from ~300 MPa to over 700 MPa
🔹 Peak tensile strength reached 924.1 MPa
🔹 Nitrogen solubility rises from 0.81% to 1.01% under pressure

That's roughly 2.3× the yield strength and near-elimination of weld porosity from one process change.

The catch? Impact toughness dropped from ~32 J to ~11 J. So pressurized welding suits shipbuilding, pressure vessels and cryogenic fabrication — but impact-loaded joints still need careful tuning.

Could pressurized-chamber welding earn a place on real production floors? Share your take below 👇

⚠️ Tougher welding fume limits are coming — is your shop ready?WorkSafe ACT is cutting the exposure standard for alumini...
09/06/2026

⚠️ Tougher welding fume limits are coming — is your shop ready?

WorkSafe ACT is cutting the exposure standard for aluminium welding fumes from 5 mg/m³ to just 1 mg/m³ (8-hour average), effective September 9, 2026. A five-fold tightening for fabricators welding boats, vehicle trays, walkways and other aluminium products.

What welding shops should do:
🔹 Identify every aluminium-welding task and who may be exposed, including contractors
🔹 Make sure source capture or local exhaust ventilation (LEV) is properly maintained and used — respirators aren't a substitute for higher-order controls
🔹 Review welding risk assessments, SWMS and hot-work procedures before the deadline
🔹 Get occupational-hygiene advice and monitor exposure if you're not confident it stays under the limit
🔹 Check respiratory protection: selection, fit testing, training and maintenance

The limit is ACT-specific, so update only the documents covering aluminium welding. Fume control is a compliance priority worldwide — staying ahead protects your welders and your business.

🔧 Review your LEV and air-monitoring records before September 9.

🤖 Pipe welding just got smarter!MeiWelding Technology showcased a one-stop intelligent pipeline welding solution at the ...
09/06/2026

🤖 Pipe welding just got smarter!

MeiWelding Technology showcased a one-stop intelligent pipeline welding solution at the 3rd Welding Industry Intelligent Transformation Conference 2026 — fully automatic systems built for demanding fabrication work.

🔧 What's in the lineup:
• Automatic U-tube & tube-plate welders for heat exchangers
• Pipe and orbital automatic welding machines
• Circumferential & longitudinal seam welding equipment
• Argon arc welding robots for precision joints

⚙️ Standout feature: the closed automatic pipe welder uses double protection — argon arc self-melting plus circulating water cooling. Result: oxidation-free, mirror-finish welds that meet strict GMP hygiene standards.

👷 Zero-experience friendly: operators are productive in just 1–2 hours of training.

Automation makes high-quality welding repeatable, precise, and safer for any shop.

💬 Thinking about automating your pipe or tube welding? Talk to your equipment supplier about robotic and orbital solutions today.

🤖 AI welding just took a big leap forward!Novarc Technologies just launched NovAI Autonomy, a major step for its AI-powe...
09/05/2026

🤖 AI welding just took a big leap forward!

Novarc Technologies just launched NovAI Autonomy, a major step for its AI-powered welding suite — and it's bringing that autonomy to a whole new range of robot arms.

What's new:
• NovAI Autonomy — built on five years of field-proven physical AI for smarter, self-adapting weld paths on the real shop floor.
• Bigger reach — Novarc AI welding now integrates with Yaskawa and ABB robots, opening automated welding to far more production lines.
• Better control — the release also includes the Miller Copilot Builder with Blue IQ adaptive automation, a practical on-ramp for real fabrication environments.
• Built for real shops — less babysitting, more uptime, and more consistent weld quality.

For fabricators running pipe, spool, and structural work, this means high-tech automation is no longer locked inside massive robotic cells — it's getting easier to deploy on robots you already trust.

Think AI welding is ready for your shop? Tell us what you think below! 👨‍🏭🔥

🤖 China's intelligent welding robot market is accelerating fast.GGII data shows welding robot sales hit 59,500 units in ...
09/05/2026

🤖 China's intelligent welding robot market is accelerating fast.

GGII data shows welding robot sales hit 59,500 units in 2025 — up 13.3% year over year — with arc welding robots accounting for 41,600 units. For 2026, sales are projected to reach 67,900 units as intelligence reshapes the lineup.

What's driving the boom:
📈 Automation demand — rising labor costs and a persistent skilled-welder shortage push more shops to automate.
⚙️ Smarter robots — AI vision, teaching-free programming and cobots are moving from the lab into real production lines.
🌏 China leads — it accounts for most of global intelligent welding robot sales, and that share keeps growing.
🔮 What's next — the next five years are the window where intelligent welding robots shift from validation to large-scale deployment.

For fabricators and distributors, the takeaway is clear: welding automation is no longer niche — it's the industry's mainstream direction.

Planning to add robotic welding to your shop? Let's talk in the comments 👇

Meritus Gas Partners expands in Colorado 🏔️Meritus Gas Partners' subsidiary Buckeye Welding Supply has acquired Wagner W...
09/04/2026

Meritus Gas Partners expands in Colorado 🏔️

Meritus Gas Partners' subsidiary Buckeye Welding Supply has acquired Wagner Welding Supply of Longmont, Colorado — an 80+ year industrial and medical gas distributor serving northern Denver.

Key highlights:
🔹 Wagner brings more than eight decades of trusted service and deep customer relationships
🔹 The deal gives Buckeye its fifth location in the region
🔹 Adds access to construction, aerospace, and chemical industry markets
🔹 Builds on Buckeye's earlier acquisition of HICO Distributing
🔹 Strengthens the combined footprint across the Mountain West

Welding supply distributors are consolidating to serve growing industrial markets — and this move positions Buckeye to serve a broader customer base across northern Colorado.

Big things ahead for the region's fabrication and manufacturing community. 🔧

Address

3959 E Guasti Road, Unit B
Ontario, CA
91761

Telephone

+18666865088

Website

Alerts

Be the first to know and let us send you an email when KickingHorse USA - Welding Inverter for Home posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to KickingHorse USA - Welding Inverter for Home:

Shortcuts

Share

Category