Aeroflex USA

02/02/2023

Aeroflex USA's Aerocel® brand of EPDM closed-cell elastomeric insulation is now AEROFLEX® EPDM™.

08/20/2021

Looking for an alternative to cellular glass for chilled water applications? Closed-cell elastomeric insulation is the perfect solution. https://bit.ly/381hlCg

08/19/2021

A PROVEN hermetic solution to a common insulation failure point at pipe hangers…Aerofix® Insulated Pipe Supports.

Product Page: https://bit.ly/3D2XBfC

Technical Bulletin: https://bit.ly/2WcNmok

08/18/2021

Aeroflex USA's Aerocel brand of EPDM closed cell elastomeric insulation checks ALL of the boxes for VRF/VRV system requirements.

https://www.aeroflexusa.com/how-to-choose-vrf-and-vrv-pipe-insulation/

08/17/2021

When a project design team needs an insulation coating that complies with LEED, ASHRAE 90.1, IECC and state/local energy codes for solar radiation protection, Aeroflex USA has them covered with Aerocoat LVOC.

https://www.aeroflexusa.com/product_page/aerocoat-lvoc/

08/16/2021

A white paper that explains the chemical differences, and why it matters, between EPDM and NBR/PVC closed-cell elastomeric foam HVAC, refrigeration & plumbing insulation.

https://www.aeroflexusa.com/wp-content/uploads/2021/03/Aeroflex_White-Paper_Chemical-Polarity_030821.pdf

08/13/2021

New installation guide from Aeroflex USA for insulating building mechanical systems with Aerocel EPDM closed-cell elastomeric foam pipe, duct & equipment insulation.

https://www.aeroflexusa.com/wp-content/uploads/2021/06/Aeroflex_Installation-Guide_062521-1.pdf

11/25/2020

Choosing the right VRF pipe insulation (or VRV pipe insulation) system can deliver countless benefits. Although variable refrigerant flow (VRF) or variable refrigerant volume (VRV) systems have been available in other countries for about three decades, this HVAC technology has only been available in the U.S. market for a decade or so. In that relatively short period of time, VRF/VRV has experienced a 200%+ growth rate.

Learning more about how this technology can benefit heating and cooling system design, ductwork, and more makes it clear why that increase in growth has been so dramatic. If you’re looking for a system that can increase energy efficiency, save space, protect against condensation, pipe corrosion, and mold while also offering increased design options and enhanced individual user controls, this proven technology can deliver.

Read more here:

Choosing the right VRF pipe insulation (or VRV pipe insulation) system can deliver countless benefits. Although variable refrigerant flow (VRF) or variable

11/24/2020

NFPA 90A is the Standard for the Installation of Air-Conditioning and Ventilating Systems, and NFPA 90B is the Standard for the Installation of Warm Air Heating and Air-Conditioning Systems.

Both standards address the construction, installation, operation and maintenance of HVAC systems.

In this blog, we break down how these two fire safety standards differ and how closed cell elastomeric foam HVAC pipe and duct insulation meets these standards.

Read more here:

Two applicable fire safety standards for HVAC systems in the built environment are NFPA 90A and NFPA 90B, here are the differences.

11/04/2020

SPEED UP INSULATION INSTALLATION WITH AEROCEL-SSPT®

The best closure system in the world, Aerocel® Stay-Seal® with Protape® (Aerocel-SSPT®) is a self-sealing, dual-direction adhesive that maintains its seal in the harshest of conditions. With Aerocel-SSPT®, your installations will be 300-400% faster.

Aerocel-SSPT® utilizes a unique 2-step sealing system to ensure a permanent seal. Step 1 is an acrylic adhesive seam seal on the inside of the longitudinal joint. Step 2 is an EPDM flap that utilizes a cellular fusion adhesive that closes across the top of the longitudinal seam. This adhesive chemistry bonds the EPDM to the tube ensuring a seal for the life of the system.

Learn more about Aeroflex's Stay-Seal® with Protape® Pipe Insulation here:https://www.aeroflexusa.com/wp-content/uploads/2020/08/Aeroflex_-Aerocel_SSPT_Submittal_081120.pdf