ABOUT THE HOLE TROLL
*For use in situations where a hole saw cannot be accurately set or controlled
*Save time and money by avoiding workarounds and botched jobs
*Keep your job site safe by preventing injury
*Plumbers, Electricians, Framers, Carpenters, and DIYers all love this product
*Made In USA of high quality recyclable plastic
*Package Includes: 6 units
*Two sizes to accommodate hole saw di
ameters between 1" and 5-1/2"
*Easy to use. Secure it. Set your hole saw in the groove that fits your hole saw attached to a drill. Start cutting. HOLE TROLL INSTRUCTIONS
Warning: Do not attempt to use this product until you have read thoroughly and completely understand the operator’s manual for any power tool and hole saw used, and the instructions and cautions below. Failure to do so may result in serious injury. Tools needed:
• AC Power Drill or DC Drill 18 Volts or more
• At least 4 (four) 10-gauge or larger nails or screws; or construction-grade adhesive/double-sided tape (each a “fastener” or collectively “fasteners”). Applications
You may use this tool for the following purpose: Cutting a hole through a flat surface on a destructible material, using a hole saw, where a previous hole may or may not have existed, without measuring. NOTE: Specific hole saws may not be designed to work without pilot bits. While the Hole Troll may stabilize a hole saw blade without a pilot bit, doing so may pose significant risks to a user. SAFETY SHOULD ALWAYS COME FIRST. Hole Troll users should consult their hole saw and power drill manufacturer instructions and warnings before deciding to use the Hole Troll. (The Hole Troll was developed to help prevent injuries, wasted
time and materials damage experienced by hole saw users, but it is not a pilot bit replacement.) Instructions for Product Use
1. Identify and visibly mark the location on a destructible surface
where a hole of desired diameter is to be cut.
2. Use the grooves (between raised ridges) on the Hole Troll to visually align
the Hole Troll with the mark on the surface, and position the Hole Troll at the
desired location on the surface.
3. Secure the Hole Troll at the desired location with the appropriate fastener(s), ensuring all
of the following:
a. Fastener firmly connects the Hole Troll to the surface so it does not move;
b. Fastener location is outside the cut radius (the diameter of the hole saw), such that the
hole saw being used will not come into contact with any fastener;
c. Fastener placement secures the Hole Troll as broadly as possible, covering 0°, 90°, 180°
and 270° along its circumference (border), between the inside of the final ridge of the
Hole Troll and outside of the cut radius.
4. With a hole saw of desired diameter properly secured to a power drill, gently rest the annular
(cutting) blade of the hole saw in the groove that corresponds to the desired hole diameter. NOTE: Follow drill manual instructions to install hole saw into drill chuck. NOTE: Only use hole saws in good repair that are specifically designed to
cut through the surface material. Incorrect or worn hole saws may fail or
cause injury.
5. SLOWLY activate the drill with the hole
saw in place, increasing pressure and power to the drill
if and when the hole saw begins to cut through the Hole Troll. NOTE: Ensure the drill is flush with the surface and perpendicular to
the surface, so the hole saw passes through the Hole Troll and into the surface
smoothly.
6. When the hole saw cuts through the Hole Troll and into the surface, continue with
normal hole saw use until the hole is cut. NOTE: If the Hole Troll becomes unfastened, or the hole saw does not cut through the Hole
Troll, then STOP. Repeat the steps above, as required.
7. Remove the fasteners and Hole Troll remnants from the surface and hole saw, and discard them. WARRANTY INFORMATION
The Hole Troll is a destructible device constructed of recyclable material and is designed to be destroyed and discarded after first use. Hole Troll products sold in the USA are warranted to the original consumer purchaser to be free from breakage or fracture caused by material defects in material or workmanship for one year from the original date of Product purchase and prior to first use, provided such breakage or fracture renders the Product unusable for its intended application as defined in the Product Instructions. Product Instructions should be reviewed prior to Hole Troll use and are available in the Hole Troll packaging and/or on this site and/or upon request from Vista Tools LLC. This warranty does not apply to damage from normal use, misuse, alterations, abuse, normal wear and tear, or warping caused by storage at or above 140℉ (60℃). Vista Tools LLC will replace the Product which, after examination, is determined by Vista Tool LLC to have breakage or fracture caused by materially defective material or workmanship and not due to the aforementioned exclusions. Return of the Product to Vista Tools LLC is required. A copy of the purchase receipt should accompany the product. Replacement of the product with new or substantially similar product or, at Vista Tool LLC's option, a refund of the purchase price paid by the purchaser, is the exclusive remedy and exclusive's obligation under this warranty. In no event shall Vista Tools LLC, its officers, directors, employees, agents, affiliates, successors and permitted assigns be liable for any losses, damages, liabilities, deficiencies, claims, actions, judgments, settlements, interest, awards, penalties, fines, costs, or expenses of whatever kind, including attorneys’ fees, that arise out of any damage to, failure of, or defect in any Product or its packaging. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is exclusive and in lieu of all other express warranties, written or oral. To the extent permitted by law, Vista Tools LLC disclaims any implied warranties, including without limitation any implied warranty of merchantability or fitness for a particular use or purpose. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. This warranty applies only to Product sold in the USA. Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase. PATENTS & TRADEMARKS
The Hole Troll is protected by trademark registration and one or another patent or patents pending, including U.S. Patent No. 10391565 and U.S. Patent No. All rights are reserved by Vista Tools LLC and/or its owners.
