Baxter's Vintage Restoration

Baxter's Vintage Restoration Specializing in restoring your vintage metal gliders and chairs. Specializing in restoring your vintage gliders and chairs.

Did Santa not bring around what you really wanted? Was that “want” a RESTORED VINTAGE GLIDER?!?!  Well, I’m here to help...
12/26/2025

Did Santa not bring around what you really wanted? Was that “want” a RESTORED VINTAGE GLIDER?!?! Well, I’m here to help. I have FOR SALE these two ATLANTA STOVE WORKS three seater gliders. Restoration to begin after the purchaser has made a color selection. These are for sale for $800 each. The glider will be disassembled, sandblasted, powder coated in a color scheme of your choosing, and reassembled with new stainless steel hardware (patterns done in an alternate color is an upcharge). I will make these look like new pieces. Half down through Zelle or Venmo will stake your claim. Who wants one? 

Customer states:  My grown son and two of his buddies sat in my heirloom glider and bent the frame. Can you repair that?...
12/14/2025

Customer states: My grown son and two of his buddies sat in my heirloom glider and bent the frame. Can you repair that? 

Yes. I can heat that frame up, pull it back to square, and stabilize it with 3/8 solid bar to prevent it from failing again.  I can also do that to the matching chair to keep it from having the same failure down the road. While I’m at it, let’s replace those toasted hangers. Those that hook on the top end are held in place on the bottom end with a cotter pin and pivot on the tubing frame. I have a better idea. I’ll also get some 1/4” fender washers welded on those strengthed out oblong 5/16” holes on the glider and chair frames. Bring those pivot points back to 1/4” round holes. They’ll both be pivoting/swinging on new delrin bushings when restored.

Check out the toasted old hangers in the last shots. Also look for the sweet new feet for the frames that I think I’ll add to restorations moving forward.

Powder coated in RAL6029

You learn as you go. I’ve been doing this awhile now. Still learning. Cool gig.

12/13/2025



Hey friends. Help a brother out. Been at this 10plus years. Really close to breaking 3k followers. Consider finding a favorite post, share that, then shower me with praise. Thanks in advance.

Merry Christmas.

BUNTING BASKETWEAVE SETParticularly proud of this set. These are the chair frame repairs I’ve been posting about. The on...
12/13/2025

BUNTING BASKETWEAVE SET

Particularly proud of this set. These are the chair frame repairs I’ve been posting about. The ones I got some superior welding help with. All three pieces got new steel where they touch the ground. Check out how the chair frame support bars are on a nice line with the chair back panel. I also busted out and polished up some OG OEM brass acorn nuts for the assembly. Check out the new chair frame caps Amazon put on the porch.

Continuous improvement. Attention to detail. That’s what we’re striving for.




BUNTING PIECRUST TWO SEATER GLIDERRestored for a customer. Powder coated in RAL3011.
12/07/2025

BUNTING PIECRUST TWO SEATER GLIDER

Restored for a customer. Powder coated in RAL3011.

**************FOR SALE**************    ATLANTA STOVE WORKS GLIDER            FULLY RESTORED - $850I have three gliders ...
12/02/2025

**************FOR SALE**************
ATLANTA STOVE WORKS GLIDER
FULLY RESTORED - $850

I have three gliders for sale. Restoration to begin after purchaser has chosen colors scheme. Pictured below are ASW BasketWeave gliders I’ve done over the past ten years. The last shot is of the gliders that are for sale

What color you want? Half down through Venmo or Zelle will get the ball rolling. Who wants one?

Four ASW gliders. Two Bunting chairs. One ‘94 model Chevrolet.
11/30/2025

Four ASW gliders. Two Bunting chairs. One ‘94 model Chevrolet.

Perfect. Happy Thanksgiving!
11/27/2025

Perfect.

Happy Thanksgiving!

BUNTING CHAIR FRAME REPAIRI have a buddy who works in the weld shop at Lockheed Martin in Fort Worth. You need to be a r...
11/27/2025

BUNTING CHAIR FRAME REPAIR

I have a buddy who works in the weld shop at Lockheed Martin in Fort Worth. You need to be a really good welder to weld where they build the F35. Check out the videos in the comments that show these incredible frame repairs.

Of all the old hardware I remove from old chairs and gliders, I only save the brass acorn nuts I pull from Bunting piece...
11/05/2025

Of all the old hardware I remove from old chairs and gliders, I only save the brass acorn nuts I pull from Bunting pieces. I polish up some now and then to use in a restoration. They shine up like jewelry, but tarnish over time. The nylon insert nut I use in replacement of these is hard to beat.

Nice note! Planning to begin disassembly part of the next group November 1st. Want in on that group? Holler. 817-907-881...
10/23/2025

Nice note!

Planning to begin disassembly part of the next group November 1st. Want in on that group? Holler. 817-907-8817

10/19/2025

Powder coated in Gloss Black

Address

229 Verde Court
Weatherford, TX
76087

Website

Alerts

Be the first to know and let us send you an email when Baxter's Vintage Restoration posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Baxter's Vintage Restoration:

Share

Category