US Saws

Call Directions

US Saws Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from US Saws, Tools/Equipment, .

Standing water is one of the most common — and most overlooked — delays on utility work.Before a crew can read a meter, ...
09/10/2026

Standing water is one of the most common — and most overlooked — delays on utility work.

Before a crew can read a meter, exercise a valve, or make a repair, someone has to deal with the water sitting in the pit. Bailing by hand wastes time. Dragging out a generator for a corded pump wastes even more.

The U.S.SAWS BP1520 Battery Powered Utility Pump was built for exactly this problem. It runs on the 20V Dewalt or 18V Milwaukee batteries and pumps 15 gallons per minute, so valve boxes are clear in minutes — not half the morning.

Why it works in the field:

✅ Battery powered — no cords, no generators, no hassle
✅ Slim pump head fits tight meter pits and valve boxes
✅ Durable PVC body resists rust, dents, and corrosion
✅ High-volume 15 GPM pumping capacity

Less time fighting water. More time on the actual work.

Learn more at ussaws.com or call 877-817-6687.

4 inches wide. 1-3/4 inches deep. Spalled joints don't stand a chance against the MC-800P "Joint Hog."A powerful milling...
07/10/2026

4 inches wide. 1-3/4 inches deep.

Spalled joints don't stand a chance against the MC-800P "Joint Hog."

A powerful milling machine and saw engineered to remove up to 4” wide and 1-3/4” deep of concrete—ideal for repairing spalled joints.

Dial in the width for the job:
• 8 blades = 2" wide cut
• 16 blades = full 4" wide cut
• Custom spacing available for specialty applications

Bonus: the up-cut blade direction ejects millings straight into a vacuum plenum blade guard, so dust and debris get captured instead of coating your jobsite.

Still turning valves by hand? There's a better way.The Valve Exerciser is a portable, battery-powered valve turning mach...
05/10/2026

Still turning valves by hand? There's a better way.

The Valve Exerciser is a portable, battery-powered valve turning machine that delivers serious torque without the serious strain.

Why municipal water departments and treatment facilities are making the switch:

✅ Less fatigue, fewer injuries
✅ Built-in operator protection
✅ No guesswork
✅ Goes where the work is
✅ Built to last

Reaches valves from 8" down to 108" deep with included extensions and custom sizes are available.

Beveling PVC pipe shouldn't slow down your crew.Traditional beveling methods are slow, inconsistent, and a leading sourc...
03/10/2026

Beveling PVC pipe shouldn't slow down your crew.

Traditional beveling methods are slow, inconsistent, and a leading source of preventable hand injuries on pipe jobs.

The 16 Flute Universal Beveler solves both problems. It threads directly onto any standard 5/8"-11 right angle grinder and produces clean, consistent bevels on 6"–16" pressure-rated PVC pipe in a fraction of the time.

Why contractors and municipalities are making the switch:

✅ Uses equipment your crew already carries
✅ One tool covers the full 6"–16" range
✅ Consistent bevels support
✅ Reduces hand injuries from manual beveling

Less time per joint. Fewer injuries. Better connections.

Learn more at ussaws.com or call 877-817-6687.

30/09/2026

The 4 Magnet Utility Robotron — the tool that does the heavy lifting so your back doesn't have to.

🧲 Up to 325 lbs magnetic lifting capacity
📦 Comes with 4 magnets, an extendable handle, and a carrying shoe
✅ Built to help prevent the back injuries that come with lifting lids by hand

Four steps. Zero strain. Get it done right.

Day 3 at WEFTEC is LIVE! 🙌It’s the final day here in New Orleans! If you haven’t stopped by yet, come see us at Booth #...
30/09/2026

Day 3 at WEFTEC is LIVE! 🙌

It’s the final day here in New Orleans! If you haven’t stopped by yet, come see us at Booth #546 at the Ernest N. Morial Convention Center.

Brandon and Stephanie are on the floor and ready to talk shop. Stop by to check out our equipment lineup, get a hands-on look at the tools, and learn how U.S. SAWS can help with your next project.

📍 Booth #546
🏛️ Ernest N. Morial Convention Center
🗓️ Day 3 — last chance to stop by!

Day 2 at WEFTEC is LIVE!We're back at it in New Orleans. Come see us at Booth #546 at the Ernest N. Morial Convention C...
29/09/2026

Day 2 at WEFTEC is LIVE!

We're back at it in New Orleans. Come see us at Booth #546 at the Ernest N. Morial Convention Center!

Brandon and Stephanie are on the floor and ready to talk shop. Stop by to check out our equipment lineup, get a hands-on look at the tools, and see what we can bring to your next project.

📍 Booth #546
🏛️ Ernest N. Morial Convention Center
🗓️ Day 2 — don't miss it!

It's here! WEFTEC 2026 kicks off today in New Orleans. 🎉Visit us at Booth #546 at the Ernest N. Morial Convention Cente...
28/09/2026

It's here! WEFTEC 2026 kicks off today in New Orleans. 🎉

Visit us at Booth #546 at the Ernest N. Morial Convention Center, September 28–30. Our team is ready to connect — stop by and say hello!

The right core drill starts with the job. Core Pro drills deliver fast, clean, accurate coring through concrete, brick, ...
25/09/2026

The right core drill starts with the job.

Core Pro drills deliver fast, clean, accurate coring through concrete, brick, and stone — with models to core from 1" to 16".

Before you drill:
• Match hole size to the model — small cores for anchors and conduit, large for HVAC and pipe
• Know your material — the right bit and steady pressure prevent stalled bits
• Plan for water and dust — wet coring cuts cleaner and cooler, but needs containment
• Secure your setup — a stable base means straight holes and a safer operator

Whatever the job, there's a Core Pro built for it.

The most common concrete repair mistake? Skipping the routing.Filler poured directly into an unrouted crack bonds to a r...
23/09/2026

The most common concrete repair mistake? Skipping the routing.

Filler poured directly into an unrouted crack bonds to a rough, contaminated surface and that repair won't hold up.

Routing first opens a clean, consistent channel with fresh material on both sides. The result: stronger adhesion, proper depth, and a repair that lasts.

The 5" Premium Crack Chaser was built for exactly this. It cuts up to 1-1/4" deep, runs variable speed from 2,800–9,600 RPM, and comes with a full metal guard and polycarbonate dust shroud that stands up to job site conditions.

It also handles:
✔ Cutting repair patches in concrete surfaces
✔ Joint cleanout in tight spaces
✔ Joint fill removal

Prep it properly. Fill it once. Move on.

Address


Telephone

+17144347297

Website

Alerts

Be the first to know and let us send you an email when US Saws posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed hardware service?

Share