Weber-Tylon South Africa

Weber-Tylon South Africa Weber is part of the Saint-Gobain group employing more than 10 000 people across 67 countries w
(1)

Empowering people to build better.​On-site challenges don’t just slow you down — they can compromise your entire install...
21/05/2026

Empowering people to build better.​

On-site challenges don’t just slow you down — they can compromise your entire installation. Here’s what you’re up against:​

ADHESION CHALLENGES​

• Substrate movement leading to tenting and bond failure​

• Tile bulging from insufficient adhesive flexibility​

• Moisture ingress weakens adhesion over time​

THERMAL EXPANSION​

• Underfloor heating creates expansion stress​

• Temperature fluctuations impacting tile adhesion performance​

• Need for compatible waterproofing systems beneath tiles​

MOISTURE EXPOSURE​

• Reduced substrate strength in damp environments​

• Swelling and softening of surfaces​

• Constant temperature changes leading to installation failure​

The solution?​

Choose a tile adhesive engineered to handle real site conditions — flexibility, strength, and durability where it matters most.​

Weber Tylon® Ultra-flex 12 delivers high-performance adhesion, extended open time, and reliable results across demanding applications — from interiors to exteriors, even moisture-prone areas. Build with confidence. Built to last. ​

Available in Ultra-flex 12 White https://www.za.weber/tile-adhesives/ultra-flex-12-hr-white​

Ultra-flex 12 Grey https://www.za.weber/tile-adhesives/ultra-flex-12-hr-grey​

13/05/2026

Empowering people to build better.​

When projects demand bigger formats and higher performance, you need an adhesive that delivers without compromise.​

Weber Tylon® Ultra-flex 12 - engineered for the next generation of tiling.​

🔹 High-strength adhesion for extra-large slabs up to 1700 x 3600 mm​
🔹 C2TE S1 (EN12004) classified for superior flexibility and performance​
🔹 Polymer-modified for enhanced durability​
🔹 30-minute extended open time for precision placement​
🔹 6-hour pot life | 12-hour setting time​

Designed for interior & exterior applications, Ultra-flex 12 offers the flexibility needed to handle movement, temperature changes, and demanding site conditions.​

Ideal for:​

✔️ Floors & walls​

✔️ Residential & office applications​

✔️ Water-based underfloor heating systems​

Suitable for: Ceramic | Porcelain | Granite | Natural stone tiles | Gypsum board and other prepared substrates​

​

Available in Ultra-flex 12 White https://www.za.weber/tile-adhesives/ultra-flex-12-hr-white​

Ultra-flex 12 Grey https://www.za.weber/tile-adhesives/ultra-flex-12-hr-grey​

Built for professionals working with extra-large slabs - where precision, strength, and flexibility matter most.​

Go bigger. Build stronger. Build smarter.​

EmpoweringPeopleToBuildBetter

Thank You for Visiting Us at Floors in Africa Expo 2026!We’d like to extend a heartfelt thank you to everyone who stoppe...
08/05/2026

Thank You for Visiting Us at Floors in Africa Expo 2026!

We’d like to extend a heartfelt thank you to everyone who stopped by our stand over the past two days. It was a pleasure connecting with so many industry professionals, contractors, and new faces, and showcasing our flooring solutions.

Your time, interest, and engaging conversations made the expo a great success for us. We truly appreciate your support.

Join weber, a.b.e.®, TF Technical Finishes, and Chryso at Stand 22 & 23 as we showcase complete flooring solutions backe...
06/05/2026

Join weber, a.b.e.®, TF Technical Finishes, and Chryso at Stand 22 & 23 as we showcase complete flooring solutions backed by the innovation and expertise of Saint-Gobain.​

From substrate preparation and waterproofing to tile adhesives, flooring systems, and performance construction chemicals — discover solutions engineered to build stronger, smarter, and more reliable spaces from the ground up.​
​
📅 6 – 7 May 2026​

📍 Floors in Africa Expo 2026 | Stand 22 & 23​

Secure your spot today:​

🌍 www.floorsinafricaexpo.com​

🎟️ https://tickets.tixsa.co.za/event/floors-in-africa-expo-2026​

Come meet the team, explore our systems, and see how integrated flooring solutions can transform your next project.​

05/05/2026

Join us at Floors in Africa Expo 2026!​

Discover complete flooring solutions from the ground up with weber, a.b.e.®, TF Technical Finishes, and Chryso — four expert brands united under Saint-Gobain to deliver one high-performance flooring system.​

From surface preparation and waterproofing to adhesives, flooring systems, and construction chemicals, our solutions are designed to support every stage of your project with innovation, performance, and reliability.​

📅 6 – 7 May 2026​

📍 Floors in Africa Expo 2026, Stand 22 & 23​

Register now:​

🌍 www.floorsinafricaexpo.com​

🎟️ https://tickets.tixsa.co.za/event/floors-in-africa-expo-2026​

Visit our stand and experience the power of integrated flooring solutions.​

30/04/2026

Ever wondered what keeps your tiles strong, stable, and protected over time?​
In any successful tiling project, the focus often falls on the tile selection -but the real performance lies in the details. Tile grout plays a critical role in ensuring the durability,
stability, and longevity of the entire installation.​
​
Grout secures tiles firmly in place, preventing movement that can lead to cracks or failure over time. It also acts as a protective, water-resistant barrier, helping to prevent
moisture ingress that can cause damage, mould, and mildew,especially in high-exposure areas like bathrooms, kitchens, and external applications.​
​
Beyond protection, grout enhances the overall finish by sealing joints, keeping dirt and debris out, and delivering a clean, seamless aesthetic that reflects the true quality of
workmanship. Choosing the right grout and applying it correctly is essential to achieving a professional, long-lasting result. Because in tiling, performance isn’t just
about what you see on the surface, but what supports it beneath and between.​
​
Weber Tylon Tile Grout – The strength between every tile.​
​
Empowering people to build better.​
​
For more technical information https://lnkd.in/d-HuN34F​
​
hashtag hashtag hashtag

23/04/2026

Build better, no matter the challenge.
On-site conditions don’t just slow progress - they put your entire installation at risk. From adhesion failures to thermal stress and constant moisture exposure, every detail matters. Here’s what you’re up against:

ADHESION CHALLENGES
• Substrate movement leading to tenting and bond failure
• Tile bulging from insufficient adhesive flexibility
• Moisture ingress weakens adhesion over time

THERMAL EXPANSION
• Underfloor heating creates expansion stress
• Temperature fluctuations impacting tile adhesion performance
• Need for compatible waterproofing systems beneath tiles

MOISTURE EXPOSURE
• Reduced substrate strength in damp environments
• Swelling and softening of surfaces
• Constant temperature changes leading to installation failure

The solution?

Choose a tile adhesive engineered to handle real site conditions — flexibility, strength, and durability where it matters most.

Weber Tylon Rapid 12 Plus delivers high-performance adhesion for large-format tiles up to 800 x 1600 mm, 6-hour pot life for extended workability, 12-hour setting time for faster project turnaround and C2TE (EN12004) classified for trusted performance.

Build with confidence. Built to last. https://prod-za.weber.content.saint-gobain.io/tile-adhesives/rapid-12-plus

15/04/2026

Introducing Weber Tylon® Rapid 12 Plus - a high-performance, polymer-modified tile adhesive designed for precision, strength, and reliability across every project.

On-site challenges like thermal expansion, moisture exposure and adhesion challenges can compromise your tile installation.

Why Rapid 12 Plus?
🔹 High-strength adhesion for large format tiles up to 800 x 1600 mm
🔹 6-hour pot life for extended workability
🔹 12-hour setting time for faster project turnaround
🔹 C2TE (EN12004) classified for trusted performance

Engineered for interior and exterior applications, delivering:
✔️ Extended open time
✔️ Slip resistance
✔️ Durable, long-lasting bonding

Suitable for multiple substrates: Concrete | Lightweight brick blocks (primed with Weber Tylon® Key-it) | Stone walls | Existing tiles | Cementitious plaster & renders | Swimming pools

Built for professionals who demand performance without compromise
Empowering people to build better.

For more information, visit Weber Tylon® Rapid 12 Plus https://prod-za.weber.content.saint-gobain.io/tile-adhesives/rapid-12-plus
Weber Tylon® Key-it https://prod-za.weber.content.saint-gobain.io/primers-and-additives/weber-tylon-key-it

10/04/2026

Weber Tylon® Key-It is your surfaces’ secret strength and bonding booster!

This latex-based liquid primer is designed to work hand-in-hand with Weber Tylon® Plaskey, stabilising, strengthening, and waterproofing your gypsum, cement, and plaster surfaces.

💡 Why it matters:
✔️ Stabilises friable and chalking surfaces
✔️ Strengthens mortar and concrete
✔️ Water-resistant for permanently wet areas
✔️ Exceptional consistency, interior & exterior ready

🏢 Where should you use it?
Swimming pools & wet areas
Tiling over painted plaster & gypsum
Mortar and screeding applications
Areas prone to moisture or heavy wear

From priming to bonding and waterproofing, Weber Tylon® Key-It makes your projects stronger, longer-lasting, and more reliable.

For more info, visit: https://www.za.weber/primers-and-additives/weber-tylon-key-it

02/04/2026

What makes your tiling last in high-traffic and wet areas?

Weber Bond-it – your tile system’s secret strength booster.

Bond-it is a latex-based liquid additive used to replace water when mixing Weber’s cement-based tile adhesives and grouts.

💡 Why it matters:
✔️ Strengthens your tile installation
✔️ Enhances water resistance
✔️ Built for durability in demanding environments

Where should you use it?

Hospitals
Dairies
Restaurants
Bathrooms & showers
Kitchens
External wet areas

Whether it’s heavy traffic zones or wet conditions, Weber Bond-it helps your tiles stay stronger for longer.

Pro tip: Even in areas that are mostly dry or only occasionally exposed to moisture, Bond-it adds that extra layer of reliability.

For more information visit https://prod-za.weber.content.saint-gobain.io/primers-and-additives/bond-it

Address

Halfway House

Website

Alerts

Be the first to know and let us send you an email when Weber-Tylon South Africa posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Weber-Tylon South Africa:

Shortcuts

Share

Category