Adaptive Air Compressors

Directions

Adaptive Air Compressors Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Adaptive Air Compressors, 7/11 Donaldson Street, Wyong.

PROJECT SPOTLIGHT | Mt Arthur Mine WorkshopInstalling pipework in a mine workshop while the mine keeps running takes pla...
28/10/2026

PROJECT SPOTLIGHT | Mt Arthur Mine Workshop

Installing pipework in a mine workshop while the mine keeps running takes planning. For Thiess at Mt Arthur we ran a bank of stainless steel service lines and an aluminium compressed air main at height around a 20 tonne overhead crane, with drops to every bay, all from boom and scissor lifts. Three weeks, start to finish.

Compressed Air Projects, the project division of Adaptive Air Compressors.
https://compressedairprojects.com.au/projects/mt-arthur-mine-workshop/

This little brass valve is the thing that stops your air receiver going over pressure.They get forgotten about because t...
28/10/2026

This little brass valve is the thing that stops your air receiver going over pressure.

They get forgotten about because they just sit there. But they do wear out and they can seize, and you only find out when you need it to work.

When was yours last tested? We check them as part of every service.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

Featured product: RetractaFLEX Air Hose Reel, 3/8" x 15mAir hoses left across the workshop floor are a trip hazard, and ...
27/10/2026

Featured product: RetractaFLEX Air Hose Reel, 3/8" x 15m

Air hoses left across the workshop floor are a trip hazard, and they wear out faster when they get driven over.

The RetractaFLEX keeps 15 metres of 3/8" (10mm) air hose wound up and out of the way until you need it. Pull out what you need, and it winds itself back in when you are done.

Blue case with a yellow hose, so it is easy to see.

$375.30 including GST. Link to the product page is in the comments.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

PROJECT SPOTLIGHT | Woolworths Distribution Centre, Eastern CreekA distribution centre needs dry, reliable air delivered...
21/10/2026

PROJECT SPOTLIGHT | Woolworths Distribution Centre, Eastern Creek

A distribution centre needs dry, reliable air delivered over long distances. We installed the whole system for New Edge Group: two rotary screw compressors, twin tower desiccant dryers, and a copper compressed air main at high level with droppers to every point of use.

Compressed Air Projects, the project division of Adaptive Air Compressors.
https://compressedairprojects.com.au/projects/woolworths-distribution-centre-eastern-creek/

New plant room taking shape. Receiver is in, filters are on the wall, and the Pneumatech desiccant dryer is still in its...
21/10/2026

New plant room taking shape. Receiver is in, filters are on the wall, and the Pneumatech desiccant dryer is still in its wrapping waiting to be connected.

This site needs very dry air, which is why it's a desiccant dryer and not a refrigerated one. Not sure which one you need? Ask us, it depends on what the air is being used for.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

Featured product: Chicago Pneumatic CPX30 Refrigerated DryerWater in your air lines ruins paint jobs, rusts tools and sh...
20/10/2026

Featured product: Chicago Pneumatic CPX30 Refrigerated Dryer

Water in your air lines ruins paint jobs, rusts tools and shortens the life of everything downstream. A refrigerated dryer is the simplest fix.

The CPX30 suits smaller workshop compressors. It is about the size of a toolbox at 352 x 430 x 445mm and weighs 30kg, so it will fit just about anywhere.

35 cfm capacity (1000 L/min)
7 bar standard operating pressure, 13 bar maximum

$1,565.00 including GST. Link to the product page is in the comments.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

PROJECT SPOTLIGHT | Western Sydney AirportTwelve months on site at Western Sydney Airport. We delivered the compressed a...
14/10/2026

PROJECT SPOTLIGHT | Western Sydney Airport

Twelve months on site at Western Sydney Airport. We delivered the compressed air and breathing air systems for the new Aviation Rescue Fire Fighting station, working for Fredon: oil-free compressors, high-pressure breathing air compressors and stainless steel press-fit pipework through the vehicle bays and workshops.

Compressed Air Projects, the project division of Adaptive Air Compressors.
https://compressedairprojects.com.au/projects/western-sydney-airport/

Panels off for a dryer service in Wollongong this week.Most people never see inside one of these. There's a fair bit goi...
14/10/2026

Panels off for a dryer service in Wollongong this week.

Most people never see inside one of these. There's a fair bit going on in there, and it's all working to keep water out of your air lines. A service once a year keeps it that way.

Due for one? Book it in with us.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

Featured product: Chicago Pneumatic CPM15/8 T DRYCompressor, 500L tank and dryer in one unit. One delivery, one footprin...
13/10/2026

Featured product: Chicago Pneumatic CPM15/8 T DRY

Compressor, 500L tank and dryer in one unit. One delivery, one footprint, one thing to connect.

The CPM15 is built for busy workshops that need air all day: tyre shops, paint shops, dealerships and maintenance bays. At 69dBA it can be installed close to where people are working.

11kW / 15hp, three phase
57 cfm at 8 bar (10 and 13 bar options available)
2 year warranty on the air end

$12,826.00 including GST. Link to the product page is in the comments.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

Not much room to work with on this one. The customer needed a compressor, dryer and tank inside a shipping container, so...
07/10/2026

Not much room to work with on this one. The customer needed a compressor, dryer and tank inside a shipping container, so we went with a Chicago Pneumatic CPA20. Everything is on the one frame and it still leaves room to get around it for servicing.

If you're short on floor space, give us a call and we'll work out what fits.

Adaptive Air Compressors
Servicing NSW - Delivering Nationally
02 4393 1865
[email protected]

Address

7/11 Donaldson Street
Wyong, NSW
2259

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Adaptive Air Compressors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby hardware services