EJOT Canada

09/11/2026

What actually happens to a flat roof under wind uplift? 💨
The roofing membrane can bulge upwards under wind load. The resulting forces must be safely transferred through the fastening points into the load-bearing structure.
If the load on an individual fastening point is too high, the system can fail at different points. The correct arrangement of the fasteners and their properties are therefore crucial.
👉 In our carousel, we show how wind uplift affects the roof system, where potential weak points can occur and what mechanical fastening needs to achieve.
Our product recommendation: Stress plate HTK-2G + pre-assembled DABO® screw TKR-4.8 in case-hardened steel with Climadur coating or TKE-4.8 in A4 stainless steel.

09/08/2026

Self-Drilling Screw or Self-Tapping Screw? 🔩
At first glance, they look similar. However, they differ significantly in application.
While self-tapping screws require a pre-drilled hole and reliably seal it against moisture, self-drilling screws drill the hole, form the thread and fasten the components in a single operation.
👉 In the slider, we show you the key differences and which screw is the right choice for each application.
📸 Post created with the help of AI.

09/07/2026

Strong in concrete. Flexible in application. 🔩
Our EJOT® JC2-KB Plus concrete screw is designed for fixing applications where secure installation and high flexibility are essential.
It is ETA-approved for cracked and uncracked concrete and is installed directly through the fixture.
The special feature: The JC2-KB Plus generates no expansion forces. This allows for small edge and spacing distances.
It is also fully removable, reusable, and offers two anchoring depths.
Ideal for applications such as facade scaffolding, shelving, cable trays, handrails, battens, and formwork in dry indoor areas.
One screw. Many applications.

09/01/2026

08/27/2026

Do you know that EJOT products are used in Sighartstein Kindergarten in Austria?

08/24/2026

The new Multifix SE1000 SEISMIC
Developed to meet the most demanding requirements of the construction industry, the SE1000 SEISMIC is ideal for: façades, awnings, metal and wooden structures, piping, supports, and much more.
Why choose SE1000 SEISMIC?

* High resistance to compression and bending
* Expansion-pressure-free fastening — ideal for edges and center areas
* Compatible with cracked and uncracked concrete
* Works even in flooded drill holes
* Superior chemical resistance and low odor
* Reusable cartridge with up to 100 years of service life
* Certified for structural use and compliant with REACH standards
* 24-month shelf life

Professional, safe, and long-lasting results.
Perfect for those seeking efficiency, versatility, and safety in every project.

08/18/2026

With the ejotherm® STR H, ETICS installation on timber substrates is clean, efficient, and visually flawless. Thanks to the recessed installation covered with an EPS sealing plug, a homogeneous insulation surface is achieved – without any visible fixing marks. ✨
The right solution for every application: The STR H is available in three versions. Today we’re highlighting the version featuring a galvanized steel screw for EPS and wood fibre insulation boards.
Suitable for use in:
👉 Solid timber
👉 Glued laminated timber (GLT)
👉 Cross-laminated timber (CLT)
👉 OSB panels
👉 Resin-bonded particleboard
👉 Glass fibre boards (e.g. Fermacell)
Have questions or a specific project?
👉 Send us a message!

08/17/2026

How to Properly Install Anchor Bolts? 🔩
It sounds simple, but small installation errors can have major consequences.
In our carousel, we show you 3 common installation errors and explain what you should pay attention to for a safe and reliable fixing.
👉 Swipe through and save this post for your next installation.

08/14/2026

A Stadium Like a Sculpture ⚽️
The Ion Oblemenco Stadium in Craiova opened in 2017 and today offers more than 30,000 covered seats.
Its organic, enclosed form is a defining architectural feature. Inspired by the oval works of sculptor Constantin Brâncuși, the stadium appears less like a conventional sports building and more like a sculptural landmark for the city.
The connection between the roof and the façade is particularly striking:
👉 The envelope wraps around the stands like a continuous shell, giving the stadium its futuristic appearance.
We played a key role in this construction. Our fastening solutions connect key components of the stadium and help ensure that its distinctive form can be implemented safely and durably. 🔩
👷‍♂️ CON-A / ACI CLUJ
📐 DICO SI TIGANAS birou de proiectare