Edgesmith

Edgesmith Edgesmith is your digital and physical hub for everything fence & gate. Browse, shop, learn, connect.
(1)

Edgesmith is passionate about the innovation and design of everything fence and gate. We supply fence & gate panels, hardware, electric fence systems and gate automation, as well as design and manufacture custom gates. We also supply modular pipe clamp systems for barrier and handrail applications. Our knowledgeable team are ready to assist with your enquiry and help you with the specification of your particular job.

Another load of our galvanised fence pipe getting the Powdersmith treatment. We’re a complete one-stop shop for chain li...
31/05/2026

Another load of our galvanised fence pipe getting the Powdersmith treatment.

We’re a complete one-stop shop for chain link fencing; pipe, powder-coated mesh, and fittings all in stock at competitive prices.

Our in-house powder coating system was built specifically for gate builders and fencing professionals who need quality and speed.

Contact us to discuss your next project, trade pricing and fast turnaround available.

Edgesmith.co.nz

Silverdale - 09 427 4980
East Tamaki - 09 777 7268
Christchurch - 03 662 9040

Security fence project.Energise your security perimeters with JVA. Powerful security energisers (Z18, Z14R, dual-zone Z2...
27/05/2026

Security fence project.

Energise your security perimeters with JVA.

Powerful security energisers (Z18, Z14R, dual-zone Z25 & more) + smart monitoring, fault finders, keypads, remotes & Wi-Fi IO boards.

Plus every pro accessory you need: jumbo & Y-insulators, strainers, tension springs, under-gate cable, crimps, lightning diverters, sirens, strobes, vibration sensors & tools.

⚡️Australian-engineered reliability

⚡️Expandable TCP/IP & GSM monitoring

⚡️Built for farms, perimeters & high-security installs

⚡️Easy to spec, install & maintain

One supplier. Full solutions. Zero compromises.


JVA available online at edgesmith.co.nz
Contact us to setup your tailored trade pricing.

Oasis Panel Installation Trade partners AP Fencing stacked two and a half standard 965 mm high panels to create a 2.4 m ...
21/05/2026

Oasis Panel Installation

Trade partners AP Fencing stacked two and a half standard 965 mm high panels to create a 2.4 m high privacy fence.
Available in:
Black satin finish
Custom powder coat colours (made to order)

Oasis Gates & Custom Panels
All Oasis driveway and pedestrian gates and custom panels are made to order in our Silverdale factory. They can be configured with a wide range of hinge, latch, and automation options to suit your specific requirements.

Find Oasis panels online at edgesmith.co.nz
Contact us to setup your tailored trade pricing or for a quote.

This rural cantilever project got the Roger treatment using a Medio for its brushless motor speed and reliability. Our i...
19/05/2026

This rural cantilever project got the Roger treatment using a Medio for its brushless motor speed and reliability.

Our installer partners recognise Roger Technology leads the industry with Italian-engineered brushless operators that deliver:

1️⃣ Unmatched power and torque
2️⃣ Rock-solid reliability for super intensive use
3️⃣ Exceptionally low energy consumption

Medio comes as 600kg or 1000kg and is manufactured in Italy by Roger Technology.

Medio Features:

🔶 24v AC Brushless motor
🔶 100% duty cycle
🔶 Fast as 26m/m
🔶 Absolute encoder
🔶 Magnetic limits

Available online at edgesmith.co.nz
Contact us to setup your tailored trade prices for online orders.

Chiefs Panels & Gates – Built for the Job!Strong, secure, and built to last. Perfect for your next project. Our Chiefs r...
17/05/2026

Chiefs Panels & Gates – Built for the Job!
Strong, secure, and built to last. Perfect for your next project.

Our Chiefs range is hot dip galvanised tubular steel and designed for maximum durability and security in industrial, schools & commercial sites.

Pedestrian & driveway gates available made-to-order. Lead times just 2-3 weeks. Pedestrian gates are ex-stock and ready to go.


Three models: Spike top, flat top & rod top. 1200mm to 2100mm

Made here – Chiefs panels are fabricated and powder-coated in-house at our Silverdale factory.

Available online at Edgesmith.co.nz
Or contact us for a quote or to setup your tailored trade pricing.

15/05/2026

The smooth torque delivered by a brushless motor is second to none. A feature in all Roger operators, as seen here with a Presto working on a single of gate.

Made in Italy by Roger Technology, Presto’s digital brushless motor brings impressive speed and power to every open and close.

✔️ 36v AC brushless motor
✔️ 100% Duty Cycle
✔️ Digital encoder + built-in mechanical stops
✔️ 300kg/2.5m & 400kg/4m models
✔️ 17 sec to 90 deg.

Available online at edgesmith.co.nz or contact us to setup your tailored trade pricing.

Fence Pros! Tired of cutting, nailing, and painting timber pickets? Meet the Straits Aluminium Picket Fence Panels – the...
13/05/2026

Fence Pros! Tired of cutting, nailing, and painting timber pickets?

Meet the Straits Aluminium Picket Fence Panels – the smart way to deliver that classic traditional look without the headaches.

☑️ Fully welded & powder-coated panels – simply drop them in and you’re done in a fraction of the time

☑️ Zero warping, cracking, or fading

☑️ Clean, smooth, high-end finish that lasts for decades

Available in any colour powder coat incl. classic white or modern black or charcoal.

Specs:
• Four Heights: 1000mm to 1800mm
• Panel Width: 2315mm

Made right here – Straits panels are fabricated and powder-coated in-house at our Silverdale factory.
Matching pedestrian & driveway gates available made-to-order.

Straights panels and gates are available online at Edgesmith.co.nz
Or contact us for a quote or to setup your tailored trade pricing.

Ever wondered why some gate motors just… feel different? Roger didn’t just make a brushless motor. They engineered the e...
13/05/2026

Ever wondered why some gate motors just… feel different?

Roger didn’t just make a brushless motor. They engineered the entire architecture from the ground up:

⚡️ Neodymium permanent-magnet rotor (1/3 the size, zero decay for ~300 years)
⚡️ Field-Oriented Control (FOC) that measures, calculates and adjusts torque thousands of times per second
⚡️Four-quadrant MOSFET inverter for silky-smooth power
⚡️ True battery-ready 24–36V operation with zero brushes, zero arcing, zero scheduled electrical service

Result? Cooler running, instant obstacle detection, more cycles per battery charge, and the kind of precise, silent performance trade pros notice immediately.

Want dig a bit deeper? We just dropped the complete engineering deep-dive on our website. Link below.

https://edgesmith.com.au/blogs/learning/inside-a-roger-brushless-motor-the-engineering-explained

Meet the Locinox Dino 180° Double Bearing Hinge — premium engineering that makes every swing effortless. With stainless ...
11/05/2026

Meet the Locinox Dino 180° Double Bearing Hinge — premium engineering that makes every swing effortless.

With stainless steel double bearings in a sleek powder-coated aluminum housing, this hinge delivers buttery-smooth 180° opening, 2-way adjustability, and Quick-Fix installation (no welding needed). Built tough for gates up to 150 kg and 1.5 m wide, with anti-theft/vandal-proof hardware. Available in stylish black finish.

Available online at Edgesmith.com.au
Contact us to setup your tailored trade pricing.

Need a heavy-duty boom gate that runs nonstop all day?Bionik barriers deliver the answer. Its ultra-efficient AC brushle...
07/05/2026

Need a heavy-duty boom gate that runs nonstop all day?

Bionik barriers deliver the answer. Its ultra-efficient AC brushless motor runs at a true 100% duty cycle, so it handles heavy, busy traffic reliably from morning to night without overheating or stopping.


Made in Italy by Roger Technology, their Bionik range of barriers are designed for any commercial, industrial, and large logistics areas.

✅ Absolute encoder for precise control
✅ Mechanical stops
✅ Optional battery backup
✅ Optional integrated traffic lights

Find them online at edgesmith.co.nz
Contact us for trade pricing, stock availability or technical specifications.

Address

20 Anvil Road, Silverdale
Auckland
0932

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+6494274980

Website

Alerts

Be the first to know and let us send you an email when Edgesmith posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Edgesmith:

Shortcuts

Share